Hi, We have a Star SR20II Swiss machine. We're using a USB to load and save program. It's only extend in Head 1, but it can't extend program in Head 2 of sub spindle by using M198P****. Is there any setting in parameter? would you please help? Thanks,

Hi Guys, We have a Star SR20II Swiss machine 18i Fanuc control. we're using USB to load program into machine. it's able to extend program in Head 1 but it can't extend program by using M198P**** in Head 2 of Sub spindle? Is there any parameter setting? Would you please help?

Do I need to cancel after turned it on at the of program with G50 C ???. What's the C axis in absolute or incremental?

Those toolpaths don't have compensation direction option, which mean left or right cutting path. I only do computer, and don't do cutter comp.

Morph between 2 curves, paralell to surf, or swarf milling don't have compensation direction option. Therefore, they could not comp left or right. I don't want to redraw surfaces or offset wireframes.

Would you please give ideas how to create simultaneous multiaxis paths for this part and don't use 3+2 multiaxis indexing paths. Thanks, 5AXIS_TAPER OF STEP.zip

Hi Cjep, Is it possible to create shortcut and place it on desktop of computer.

Hi Colin, is it on the mastercam website?

Thank you for reply Dandle D. If I do the math as you show me. The line move distance is about feed/distance 1.0487-.3646 =.6841 Then 115/6841=168.1 but the post only F=2.83 Is this number is set correct? pri_limlo$ : -99999 pri_inthi$ : 99999

Could you help me to modified my Haas 5 axis post to get inverse feedrate right # Post Name : Generic Haas VF-TR_Series 5X Mill # Executable : MP 14.0 use_fr : 3 #Output feedrate inv_sec : 3 #Inverse feedrate is in seconds maxfrinv : 9999.99 #Limit for feed inverse time #Rotary axis travel limits, always in terms of normal angle output #Set the absolute angles for axis travel on primary pri_limlo$ : -99999 pri_limhi$ : 99999 #Set intermediate angle, in limits, for post to reposition machine pri_intlo$ : -99999 pri_inthi$ : 99999 Using Swarf milling toolpath – .25dia carbide E/M – S7500 - F115.0 - Aluminum 6061 G94 X1.098 Y-2.3342 Z5.1549 F115. X1.0953 Y-2.3246 Z5.1486 X1.0908 Y-2.3157 Z5.1422 X1.0846 Y-2.3078 Z5.1358 X1.0769 Y-2.3014 Z5.1295 X1.0682 Y-2.2966 Z5.1231 X1.0586 Y-2.2937 Z5.1167 X1.0487 Y-2.2924 Z5.1104 G93 X.3646 Y-2.2985 Z5.1081 B1.028 A19.997 F2.83------------------TOO SLOW X.3549 Y-2.2948 Z5.1095 B.388 A19.996 F133.79 X.3402 Y-2.2976 Z5.1087 B.961 A19.987 F181.67 X.3177 Y-2.3049 Z5.1062 B2.605 A19.967 F181.52 X.3095 Y-2.3028 Z5.1071 B2.281 A19.959 F181.61 X.3024 Y-2.3008 Z5.108 B1.813 A19.957 F181.5 X.2729 Y-2.3067 Z5.1065 B3.847 A19.909 F132.77