Mark H
-
Posts
1,002 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Mark H
-
http://www.emasterca...hp?showforum=35
-
Thanks, hope it's feasible.
-
I really do not like this new feature. I need to view the area being cut from multiple views while it is being machined. I realize that I can hit the pause button, rotate the view, then hit the play button again. But to do this 100s of times is burdensome and a waste of time. However I would like to offer a suggestion. When verifying and the user chooses to rotate the view, how about an automatic pause and then when the user stops rotating the verify continues.
-
A restart of Mastercam fixed it for me.
-
X7 placing unwanted folders in my "jobs" folder
Mark H replied to Mark H's topic in Industrial Forum
Figured it out. I looked in the config file and found it was the "report" folder setting, so I changed it back to the following; 31020. Reports Folder? <APP_DIR_SHARED>Common\Reports\ -
X7 placing unwanted folders in my "jobs" folder
Mark H replied to Mark H's topic in Industrial Forum
No on the migration. I set the the MCX files (and all other geometry files) to go to C:\jobs\, but thats it. I left "shared user data" and everything else the same. When i get a chance I will try deleting the config and try again. -
X7 creates these folders IMG, MSC, NPL, NST, SST, XML, and places them in my “jobs” folder. They are empty and I don't want them there cluttering things up. If needed I would gladly have them somewhere else (like “user data folder” or “shared data folder”), but can't figure out where the setting is. In settings – configuration – files, I specify that all the geometry files (MCX, DWG, etc…) point to my “jobs” folder, but I don't see anything about the folders I have listed above. So does anyone know where the setting is for these folders to be created elsewhere?
-
Please add corner rounding to the "high speed" scallop toolpaths. Since "old style" scallop has "sharp corner smoothing" it creates a superior toolpath even though the "high speed" has better transitions and tool holder checking.
-
Yup, I got the SP1 notification too. It popped up in the windows taskbar. Downloaded and installed it.
-
I have not tried the X7 verify, but looking at your file, it appears that "dog-legged" rapids are being used. Is there a setting for that in the new verify?
-
Is this what you are looking for? http://www.emasterca...74 http://www.youtube.com/watch?feature=player_detailpage&v=vkKW5Wmgx7g
-
Yes this is a pet peeve of mine... Mastercam can't open their own older files. We still have tons of files (.GE3, .MC7) yet to be converted.
-
From what I remember it would only do this on the last chain. So if you had 3 chains, the first 2 would work fine but not the last one. What I ended up doing was creating a fake or dummy chain up and away from the part and cut air for the last chain.
-
This scares me and that is why I just don't post and run the code, I don't know what it is going to do. Without 3rd party NC verification its too much of a gamble. This doesn't work anymore - at least as far as I can tell. Several versions back It would create a 3D point (geometry), so then you could see where the invalid arc was when backplotting.
-
I keep getting this error and am concerned that a posted program with this error will cause some unintended results (i.e. crash or surface violation). It occurs with OptiCore. I was able to eliminate it by turning off the "line/arc filtering settings - create arcs in XY". But now my programs are much longer and also takes forever verify. Any other suggestions? With this be fixed in X7?
-
Thanks for your reply... I was hoping for a quick little 2D toolpath to get the machine going. Its odd that there is an option for "tapered wall" that doesn't do anything when selected.
-
Using 2D HST Blend Mill (X6 MU1) and trying to get tapered walls on the the depth cuts. The reason is so the shank of the tool wont rub once it goes deeper than the flute length. Selected tapered walls and put in 1 degree, but it doesn't appear to be working for me... any tips? FYI - comp direction set to left, and cutting "along" the chain.
-
two old school "square" monitors and one widescreen 19"(4:3 - 1280x1024) - 22" (16:10 - 1680x1050) - 19"(4:3 - 1280x1024)
-
3 monitors, thinking adding a 4th (if I had room.)
-
Flaws of 2d highspeed algorithm
Mark H replied to Teh Bear without Brains kinda idiot's topic in Industrial Forum
I had this happen too. Sent it in to my reseller who was supposed to send it to CNC... never heard back. -
I need to setup a win32 computer (probably Win XP) and install an older version of Mastercam to get geometry from GE3 files (as well as MC7). What is the latest version of Mastercam that will open the GE3 files?
-
Also fixed my Cimco editor, it too was pointing to the wrong folder. HKEY_CLASSES_ROOT\Applications\CIMCOEdit.exe\shell\open\command "C:\Program Files\mcamx6\common\Editors\CIMCOEdit5\CIMCOEdit.exe" "%1" And I didn't have to reboot for this to work.
-
Yup, the registry edit worked. It was obviously pointing to the wrong (nonexistent) folder. Surprised the X6 install didn't fix it. FYI - This is what I changed; OLD ; HKEY_CLASSES_ROOT\Applications\Mastercam.exe\shell\open\command "C:\mcamx\Mastercam.exe" "%1" NEW; HKEY_CLASSES_ROOT\Applications\Mastercam.exe\shell\open\command "C:\program files\mcamx6\Mastercam.exe" "%1" AND reboot the computer
-
bump... I had this problem in X5 and now X6mu1. I'll probably try the registry edit, unless there is another fix.
-
After adding the RAM, have you changed the Memory buffering setting in Mastercam?
