That did the trick. Thanks so much...seemed like a lame question maybe but in all reality this is the first new multiaxis project I've gotten to develop since I upgraded to MCX9 So that might give you an inkling into how xxxx is here after another corporate (English) ownership change. Thanks again and happy New Year

I realize this thread is 8+ years old but it's the closest relevant one I found when I searched so please don't bust my chops.. My question is the reverse of the above, I've set the "Backside color" for surfaces but it doesn't change. It stays stuck on whatever color in both wireframe or shaded. Oh yeah, currently MCX9. Not earth-shattering yet annoying Thank you

On our Fanuc Oi-MC's_ I/O=1 for DNC I/O=4 for the card On our Fanuc 31i-5X _ I/O=5 for the card Not sure above is relevant but I feel your pain. Been there

2nd ^^ for Harvey Tool They have some crazy reach tools in pretty much any configuration imaginable

Wasn't aware I WAS complaining. I was and am VERY appreciative of the tool and as I posted above, the flaw I encountered was of my own making. :new forum Excuse the crap out of me

Looking back, I apparently wasn't selecting correctly. I'd pick the entire solid model and get the overlaying result. Even so, it was a life saver!

While I loved and use(d) the free Verisurf hole axis tool, I have to say, the X7 option is SO much easier and cleaner to use. No longer do I have to delete and run the "findoverlap" c-hook, to clean up multiple centerlines created from every modeled diameter, (c/bores, sinks etc.) And can choose only the diameters you want. But the Verisurf tool saved my butt many, MANY times and was much appreciated!

That would be our Lansdale Facility in Pa. I'm @ the Baltimore location Good luck finding what you need

I program and run a CMS, ARES-4818-PX5 X-189", Y-71", Z-47", B+/- 120 degrees, C +/- 270 degrees About 400K installed so maybe more in the size you'd be wanting Machine is primarily for composite structures and Radoms but has performed well machining large holding and vacuum fixtures from aluminum, light cuts only. Forget anything aggressive but it holds tolerances extremely well! Their support is great via phone or Go to meeting on the machine. No regrets here

I just finished re-installing X6 for this very reason I'll leave X7 active also for stuff already done but I have several large 5 axis projects coming up and I need to be able to verify where I'm comfortable. X6 watertight issues occurred sometimes but the overall quality and comfort is something more important to me right now. While I do 90% of the programming here, I'm also the prove out guy and I need to know what’s going to happen, for my heart and sphincter's sake. These fixtures are too $$$ to risk crashing so I'll take peace of mind any time. Sometimes I seriously wonder why we are constantly updating something that works fine, as is. The headaches make me cringe every time a new release is announced.......

I could of sworn I was told that you couldn't call to a card from a main Program w/ Fanuc??

I need to save a x6 back to x5 Not seeing how?? Help please

Have a couple of XV1000's here with bare bones Fanuc Oi-MC controls and they definitely don't have any graphics that I'm aware of.

64 Bit? We had a guy ( someone at our MC reseller) tell another guy here that v9 won't run on Win 7 period, after you told me it would run w/ nethasp. we have 64 bit win 7 machines, X6, currently running USB hasp's.

Many thank guys!! Downloaded and working great. What a time saver! I don't know where I got it before? I just checked our other seat which is still X5 and its not in it either so I don't know if I installed it on my seat of X5 and had since forgotten it?? Gettin old is a Bitch........ Again, Thanks