sorry i just saw that I left off the * it is working now. BTW what dose the * do?

ok so it dose work sort of... say I have three tool path with 3 different Tools all with misc. integer set to 10 it will post : N1590 #[600+#4120]=10 N1600 M98P7000 on the first tool and on the next two N1590 #[600+#4120]= N1600 M98P7000 this only happens if the misc integer is the same amount as a tool before it. But if the are set T1 misc. integer 10 T2 misc. integer 5 T3 misc. integer 10 it post with no issuse how do I fix this? Thank you,

awesome! it worked great! thank you for all the help

ok that work to get the right amount but now it post N490 #[600+#4120]= sav_mi3 5. N500 M98P7000 how can I make it post out just the number?

Hi, I am having issues with the use of a misc. integer in my post. what I need to do is add a N1590 #[600+#4120]=XXX (xxx = misc.integer 3 amount set in tool path) N1600 M98P7000 at the end of the tool before the next tool. I think I have almost got it but when i post is is out putting the integer amount set for the next tool not the current one. and it post no amount on the late tool ext: N1590 #[600+#4120]= (Should be misc. integer amount set in tool path) N1600 M98P7000 This is what I have done sav_mi3 : 0 fmt "" 4 mi3$ In the pretract #End of tool path, toolchange i added sav_mi3 = mi3$ if mi3$ >=1, ## Daniel [ pbld, n$, "#[600+#4120]=",mi3$, e$ ## Daniel pbld, n$, "M98P7000", e$ ## Daniel ] Please help Thank you,

I have a very simple part on the 4th Axis that has slots on the top front bottom and back. If I Pocket the top slot and rotate it around it post fine. but if I do the same tool path on the Top front Bottom and Back keeping the wcs the same ans change the T and C plane for each on I get this error RUN TIME - Only single-axis rotation is allowed! Angles may be incorrect. but on when I use the Back T and C plan if I create a new plan in the same spot as the Back and name it Alt Back it will post with no Error. Please Help. Thank you,

I have a very simple part on the 4th Axis that has slots on the top front bottom and back. If I Pocket the top slot and rotate it around it post fine. but if I do the same tool path on the Top front Bottom and Back keeping the wcs the same ans change the T and C plane for each on I get this error RUN TIME - Only single-axis rotation is allowed! Angles may be incorrect. but on when I use the Back T and C plan if I create a new plan in the same spot as the Back and name it Alt Back it will post with no Error. Please Help. Thank you,

I teach MasterCam for NTMA Training center. I am looking for some extra Prints that I can hand out in my class to slow down some of the better students. Any help would be grate. Thank you,