Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Dtm

Verified Members
  • Posts

    159
  • Joined

  • Last visited

Dtm's Achievements

Newbie

Newbie (1/14)

-16

Reputation

  1. cool, I guess it's safe to say you are busy.
  2. Dylskee your back to M.C.? I thought you went back to gibbscam.
  3. All of the 5-axis work I have done has alot of code as well and I never could filter my program. I was using a custom post from in house as well, and was also using inverse time. If you figure out how to do it without a post mod. please let me know.
  4. In mastercam you must only draw 1/2 of the tool. I always draw the right side, but I'm not sure if it matters. There also must not be any other geometry on the level. When you select undefined tool select the level your geometry is on.
  5. Dtm

    form tool

    I created a form tool and it shows up in backplot, but not in verify. Anyone had this problem?
  6. That's ok. Everyone has there preference, my hole point is that is does what you tell it to do without any B.S. workarounds.
  7. Your right. I haven't done much helping. Why do you have to get all personal and use my name? I'm not sure who you. It's apparent you know who I am.
  8. I forgot to mention I did the same impeller in gibbs with fixtures on the same crappy laptop out of curiosity. The toolpaths being generated were much faster and the verify which shows RAPID MOVES only took 20 minutes.
  9. My crappy laptop handles large part files with multiple solid models, fixture clamps, ect...no problem, I tried to run verify on one single small impeller and mastercam took like 3 hours to verify. There is no comparison when it comes to solids or assemblies for that matter. I use both systems on a daily basis. I know people have preferences, but mastercam is so far behined in the solid world it's not even funny
  10. You can do the same in gibbscam. You just need to know were to look. In the advanced settings you can do anything you can in MC. The best part is it works with no glitches. It has fixture recognition in rendering. I still can't believe MC doesn't have this.
  11. Dtm

    Integrex E420

    Thanks for all your help guys. I finally got a 5-axis curve toolpath and just dry ran it and it looks good.
  12. Dtm

    Integrex E420

    It's on the ftp site, x5 folder called e420.
  13. Dtm

    Integrex E420

    Yes this is a thread and has to start at certain spot. Just run the verify and you can see what I'm doing ( It takes a few minutes due to the thread ). Mazak confirmed this is a post issue. I couldn't get a five axis toolpath to work, but I didn't spend to much time due to all my other projects. The boss just wants the post fixed. I have a bit of time now so I will try to run a few more 5-axis tool paths.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...