IM RUNNING TITEX A6585TFT-11/32IN DRILL IN 6061 ALUM AT 13850RPM AT F180.0IPM WITH 1000PSI COOLANT THRU TO GO 12 TIMES DIA DEEP. AND AS MENTIONED ABOVE YOU NEED TO USE THER PREP DRILLS TO PREP HOLES, FEED IN AT REDUCED SPEED AND FEED THEN RAMP TO FULL SPEED AND FEED.

HI EVERYONE, IM TRYING TO CREATE A CUSTOM DRILLING CYCLE FOR A FOR A TOOL THAT REQUIRES ME TO FEED WITH NO RPM OR COOLANT INTO A HOLE THAT I PREP DRILLED TO A DEPTH THAT EQUALS 1 1/2 TIMES THE DIA. OF THE DRILL, THEN DRILL TO A DEPTH THAT EQUALS 3 TIMES THE DIA. OF THE DRILL AT ONE SPEED AND FEED, THEN DRILL TO FINISH DEPTH WITH ANOTHER SPEED AND FEED, STOP SPINDLE AND COOLANT AND FEED OUT TO .100 ABOVE HOLE AT 500 IPM. ALSO IS THERE ANY WAY THAT THIS COULD BE DONE SO POST LOOKS AT DIA OF DRILL CHOSEN AND CALCULATES THE 1 1/2 DIA. TIMES AND THE THREE TIMES DIA. DEPTHS FOR ME? SO FAR I HAVE BEEN HAVING TO MANUALLY WRITE EVERY THING BELOW THE G81 LINE THAT I HAVE COMMENTED OUT. I AM USING A MPFAN POST THAT WAS MODIFIED BY OUR RESELLER TO WORK ON A MAM72-63V 5 AXIS MATSUURA. THANKS IN ADVANCE. KEVIN (.125 DIA DRILL) T225 M6 G91 G28 Z0. M132 M184 G0 G54 G90 X.5506 Y7.6112 C-12.778 A-64.138 M131 G43 H225 Z14.5619 T38 (G81 G98 Z4.3491 R6.6209 F25.5)<------THIS WOULD BE A REGULAR CANNED CYCLE Z6.6209 <------------------------------.100 ABOVE HOLE G01Z6.3334 F5.0 <----------------------1 1/2 TIMES DIA. OF DRILL INTO HOLE M50 <----------------------------------COOLANT THRU SPINDLE ON M08 <----------------------------------FLOOD COOLANT ON G04P2000 <-----------------------------2 SECOND DWELL S4225M3 <------------------------------FIRST SPEED G01Z6.1459F12.5 <----------------------3 TIMES DIA INTO HOLAE AND FIRST FEED RATE S8450 <--------------------------------SECOND SPEED G01Z4.3491F25.5 <----------------------FINAL DEPTH AND SECOND FEED RATE M5 <-----------------------------------SPINDLE OFF M9 <-----------------------------------COOLANT OFF G1Z6.6209F500. <-----------------------FEED OUT OF HOLE 500IPM G80