Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Hello, Anyone ever come across Renishaw tool setter flashing green, green red lights?
Ive replaced the batteries but every time I put the batteries in it goes through its normal cycle but then flashes green, green then red. Never stops unless I take the batteries out.
Thanks, Jason
Had an HTC break from a program error and compared the carbide on the inside to a Titan cutter and seems like the colors are a lot different. Does anyone know what that means?
We had to cut 8 relief pockets in 64 steel plates. These pockets were 3 inch deep. 2 years ago we ran the same job and each plate took 4 hours and 40 min to machine.
This time around we Used WhisperKuts from Dura-Mill and reduced the run time down to 27 min using dynamic milling. Just thought I'd share. Happy Boss.
Stick with what works best, I just can't believe I've been paying like 30% more for general purpose.
I ordered up some HTC to try out because they gave me 10% off. Worth a shot.
Here is the discount code they gave me: HTC10
I get the same thing Jeff.
I get a little plus sign when I click instead of the line. I have to exit in and out of the line function for it to work. 2 extra steps to create a line is no fun.
Thanks JParis
Thats what I'm Thinking. Run them on the not so critical parts and see what happens.
I guess HTC does a lot of private labeling so chances are I have used them in the past.
HTC Tool brand was just added to my local distributor and just looking for any feed back. They are the least expensive Carbide End mills I've seen.
They say the quality is great and HTC is one of the largest Manufactures but the price is unbelievable for American made in my opinoin.
Any feedback would be appreciated. Here is an example price. http://www.tigertoolsupply.com/htc-carbide-end-mill-p/120-4500.htm
Just wanted to add they just gave me a discount code.
Thought I would share. HTC10
Not sure why they don't just make the old ones better. All the High Speed ones just don't cut the same. The Pencil Toolpath has a mind of its own. The old leftover toolpath was flawless.
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.