Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
This is what did. From the start up instructions. It's the third option.
1) Start the CAMplete TruePath software
2) Go to Tools > Options
3) Click File Types
4) Select Mastercam and click “Advanced Properties”
5) In “Datum Settings”, enable “Treat WCS Datums As Datum Changes In Same Fixture”
6) Enable “Move Tool Paths To Global WCS And Create Local WCS In Part Coordinates”
7) Enable “Read Datum Index From NCI
I am MOST interested in these tweaks !!
As well as needing some help...
We have a Matsuura MX520 trunnion and CAMplete. Using X9. (still pushing hard for my company to upgrade !)
I have recently been awarded a new computer (WINDOWS 10).
I have loaded CAMplete on the new box and it seems to be working, for the most part anyway.
However, when I post from Mastercam there seems to be something amiss, as the “Z Rapid” moves are all facing down toward the Z negative direction. Definitely something wrong here… PLEASE HELP.
I am at a loss, and cannot post through CAMplete for our Matsuura MX520 on my new computer.
Going to send a PM as well..
Thank you in advance for any assistance you can give me !
So this a.m. I walked past the 5 axis. (which I normally set-up any 5 axis work, then hand off to operators) I noticed an EDGE FINDER in a holder on my toolbox next to the 5 axis...
My toolbox has a large flat surface on top which also doubles as a machine side bench if you will..
It sure looks like someone used the edge finder for picking up the next job to be run through the machine.
But why ??
I just don't get it...
I have trained two guys on how to use the probe cycles that came with the machine. Both are cleared to set up this nearly new machine...
Why not use the probe ??
I would hope that they are at least using the Laser Tool setter....
We have a Matsuura MX 520 also. Camplete came with the machine when we purchased it. I use Camplete for everything that goes through that machine. Occasionally an older 3 axis job will get run in it. Other than that Camplete is used exclusively for posting..
No, but the place I used to work the guy on the Electrode Cutting MAKINO revved up the RENISHAW touch probe to god knows what RPM and then proceeded to (100% RAPID) Z-dive it into the LASER TOOL SETTER !
That was an interesting sound.... of money being spent.
We had a working version of SW sometime ago (3yrs - ish), but it won't even launch now.
So i'm limited to modeling with MC...
I agree, MODEL PREP has some nice features .
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.