Have you tried on backplot, select display rapid moves?

aim high and dont give up!

there are 2 disks for sw 1 for 32bit one for 64bit and i installed the one for the 64bit, because this is a 64bit operating system i have another computer that runs 32bit and didnot have problem at all, is there a fixing or should i just forget at all? just wondering. thanks

has anybody installed mastercam direct on a 64bit system on solidworks 2009 sp3,i cannot figure out why is not working, is there a patch for it? I try reinstalling it, rebooting etc... any input will be apreciated. Thanks xp64bit mx3,8gig ram

LARGE

I agree with Colin use reference points.

thanks Chris can't wait to install it.

i will think that if you have the c/comp option in the parameters it should output c/comp when posting

i did a search and found nothing about outputing c/c on 5ax toolpath i'm trying to cut an angle wall on a 5ax haas trunion and need to use regrind 1/2 em's so i need to use c/comp on the toolpath so far i have not ben able to do it, i can selected on the parameters but i wont output c/com when i post it i try 5ax curve and 5ax swarf. if any body have any input i will apreciated i put a file on the ftp MCX2_Files/5axwall.mcx if any body want to look at it thanks x2mr2 sp1 windows xp 2gig ram

Thanks JP that did it.

Thanks guys for the help. I tried hardmill's and got it to work exept on one operation where i use a spotdrill for spotdrill/chamfer, when it goes from spot to chamfer it does not turns on g8. Bryan the link does not work. N452 (SPOT FOR THE .191 HOLES) N453 T7 M6 ( .250 X 90DEG SPOTDRILL 1.5 MIN EXT) N454 G90 G80 G40 G17 G0 N455 (MAX | Z2.5) N456 (MIN | Z-.05) N457 M3 S5000 N458 G0 G90 X6.6032 Y-1.9386 E1 N459 G43 H7 Z2.5 M8 N460 G9 N461 G81 G98 X6.6032 Y-1.9386 Z0. R.15 F20. N462 X6.6032 Y-7.9386 N463 X6.6032 Y-13.9386 N464 X20.7767 Y-13.9466 N465 X20.7767 Y-7.9466 N466 X20.7767 Y-1.9466 N467 G80 N468 (SPOT FOR ONLY 5 OF THE .750 THRU HOLES) N469 X4.3112 Y-2.6017 N470 G81 G98 X4.3112 Y-2.6017 Z-.05 R.15 F20. N471 X4.3112 Y-8.6017 N472 X4.3112 Y-14.6017 N473 X8.9418 Y-13.4652 N474 X8.9418 Y-7.4652 N475 X8.9418 Y-1.4652 N476 X13.6943 Y-1.09 N477 X13.6943 Y-7.09 N478 X13.6943 Y-13.09 N479 X18.4459 Y-13.4733 N480 X18.4459 Y-7.4733 N481 X18.4459 Y-1.4733 N482 X23.0639 Y-2.5961 N483 X23.0639 Y-8.5961 N484 X23.0639 Y-14.5961 N485 G80 N486 (CUT THE INSIDE CHAMFERS)<----MISSING G8 N487 M3 S6000<---------------------SOMEWHERE N488 X25.8923 Y-2.7685 N489 Z.76 N490 G1 Z.609 N491 G41 D7 X25.8347 Y-2.7443 F100. N492 X25.3767 Y-2.5513

thanks for the responses i'll try that.

this is what i am getting. what am i doing wrong? N2 T1 M6 (3.0 X 90DEG INSERTED FACEMILL) N3 G90 G80 G40 G17 G0 N4 (MAX | Z1.) N5 (MIN | Z-.7) N6 M3 S6000 N7 G0 G90 X23.5097 Y-6.4089 E1 N8 G43 H1 Z1. M8 G9 G8 N9 Z.1 <---------------------------- N10 G1 Z-.1 F50. N11 G41 D1 X23.6061 Y-6.1783 F100. N12 G3 X23.4719 Y-5.8512 I-.2306 J.0964

i'm trying to force g8 for -milling only- on a fadal format1 and cancel g9 for drilling on every op. i did a search on and found some code but, i have no idea where it goes, using mpfadalmaster, any input will be apreciated. here is the code. pg8g9 #Add either G8 To Milling or G9 to drilling SLA If opcode = 3 , "G9" if opcode < > 3, "G8" xppro dell x2mr2sp1 mill3, lathe2

Merry Christmas to every one. http://www.glenn.tapley.us/MC.swf