wojtek90

Customers
  • Content count

    91
  • Joined

  • Last visited

Community Reputation

6 Neutral

About wojtek90

  • Rank
    Member

Uncategorized

  • Location
    Barrie, Ontario

Recent Profile Visitors

473 profile views
  1. Hi, I loaded today 2021 beta version of Mastercam in order to check ADVANCE DRYLLING CYCLE. After installing it it is extremely slow i have to wait couple of minutes to do anything. (Advance Drilling Cycle looking good it is what I need) I have: OS Name Microsoft Windows 10 Home Version 10.0.17763 Build 17763 Other OS Description Not Available OS Manufacturer Microsoft Corporation System Name BASE System Manufacturer Acer System Model Aspire TC-885 System Type x64-based PC System SKU 0000000000000000 Processor Intel(R) Core(TM) i5-8400 CPU @ 2.80GHz, 2808 Mhz, 6 Core(s), 6 Logical Processor(s) BIOS Version/Date Acer R01-A0, 29/03/2018 SMBIOS Version 3.1 Embedded Controller Version 170.170 BIOS Mode UEFI BaseBoard Manufacturer Acer BaseBoard Product Aspire TC-885 BaseBoard Version V:1.1 Platform Role Desktop Secure Boot State On PCR7 Configuration Elevation Required to View Windows Directory C:\WINDOWS System Directory C:\WINDOWS\system32 Boot Device \Device\HarddiskVolume1 Locale United States Hardware Abstraction Layer Version = "10.0.17763.1007" User Name BASE\wojte Time Zone Eastern Daylight Time Installed Physical Memory (RAM) 16.0 GB Total Physical Memory 15.9 GB Available Physical Memory 10.3 GB Total Virtual Memory 18.3 GB Available Virtual Memory 10.3 GB Page File Space 2.38 GB How can improve performance?
  2. wojtek90

    DRILLING HOLLOW SQUARE TUBE

    Can I get this public version of Mastercam 2021 to test my holes please? I have licensed version of Mastercam 2019 and 2020 no load to computer yet.
  3. wojtek90

    DRILLING HOLLOW SQUARE TUBE

    Thank you very much. That all I need. Very informative and easy to follow. You guys make my day.
  4. wojtek90

    DRILLING HOLLOW SQUARE TUBE

    Yes I did. But there is the the only "Point cycle" and there is only point location and nothing about depth parameters and other parameters. Consequently when I posting it is not giving me all parameters which you give me as example. So if you kindly can show me how you did entire post I would appreciated. Thank again
  5. wojtek90

    DRILLING HOLLOW SQUARE TUBE

    Thank you very much. That is what I need. The only problem is how can I do it for all holes by programming it entirely in Mastercam and get the post for my Haas machine rather then copy and paste each hole using your test code.
  6. wojtek90

    DRILLING HOLLOW SQUARE TUBE

    Thank you very much I was able to open file and see exactly what you mean. I do not see however in backplot rapid movement. Maybe this will be in the post.
  7. wojtek90

    DRILLING HOLLOW SQUARE TUBE

    Sorry but what is IIRC and how I can "stacked 2 drill cycles on top one another" . Can you please explain that.
  8. wojtek90

    DRILLING HOLLOW SQUARE TUBE

    Thank you very much for long explanation. I will test it today evening. Thanks again for help.
  9. wojtek90

    DRILLING HOLLOW SQUARE TUBE

    Because of my little experience with Mastercam i do not quite understand your explanation. Can you please tell me more details. Thank you.
  10. wojtek90

    DRILLING HOLLOW SQUARE TUBE

    Thank you. I have 2019 version of Mastercam. Can you please load file in 2019 version. Thank you. Wojtek
  11. It is possible to program in Mastercam through holes in square tube 4X4 x0.375 . I would like to keep drill in the same hole drilling first wall then rapid down to bottom wall and drilling bottom wall, and then go to next hole. I don't like drilling top surface and then come back and lower "top stock" and drill bottom wall. I would rather stay in the hole. I can manually modify post ,but I have 30 holes and editing each one is very painful. Thank you.
  12. Hi, I am trying to use FBD and have many problems with it. For this example two 0.375 hole supposed be reaming holes, but Mastercam not drilling them for it, neither ream them. Insted using 0.375 end mill and I can't change it. Please help me resolved this issue. 3-480-034-014NEW.mcam
  13. Here is the Mastercam file. This is Just example i try to learn. 3-760-003-002.mcam
  14. Hi , I try to use FBD but instead speeding process it slow me down. It is giving different order of drilling and taping process. First drilling then , spot drilling then taping i have change order after. It is not picking right drill for tap hole. Plus showing so many FBM drilling cycles in tool path. See screen shot. Anybody can comments or help setting it correctly. Thank you.
  15. wojtek90

    How can I get line #

    Thank you. That was very.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us