Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
I believe it should be changed to lock the parameters/geometry etc .
But not stop from Regen, for when you have rest milling setup the old above will dirty the op.
My 10 p
Regards
Sent from my HTC One M9 using Tapatalk
I see in the setup sheet designer that i can use the "TOOLPATH-GROUP-COMMENT" Toolpath group comment.
So how do i put a comment on a toolpath group within MCam Mill X9.
Thank you for any info.
Regards BenUK
This is correct. Your WCS shouldn't change (in most cases) from op to op. The tool plane should. And the machine will index to the difference between them.
Ps. Been the same in x5, x6, x7, x8 and x9. Before x5 I don't know but would guess so.
Also why not use transformation op?
I have all on ssd for speed, but I also sync all mastercam files with Google drive, even config files. This means I can go from pc to laptop and stays the same.
But two ssd in a mirror raid would be perfect setup.
Just my bit.
There's one thing people forget is the FSB of the motherboard. Front side bus. This connects the processor to the ram and ssd. If this is slow then it will slow your system down.
My rule is. Motherboard, ram, and processor all need to be of the performance. If you try and save on one and you will lose on the rest.
Graphics and hds can easily be upgraded, as long as they are compatible...
Space navigator pro for movement and Logitech g700s mouse for selecting and macros (11 buttons of the top of my head). Love them both. Wife brought me my mouse for b-day. Love her lots too.
Im having a problem with the rotation angle. While im working in TOP view ive got it working perfectly.
However if i work from the bottom the angle is inverse. I believe this angle is calculated from TOP without caring where you want it to work.
The code is rt_cinc = atan2(sub_m2$, sub_m1$)
If anyone could tell me what the sub_m values are and what's the best way to solve my issue.
Many thanks.
Lol. No. But does it matter, it's a good app. Google it.
And as for install, all my files including config files are synced to a cloud so I can use them on different pcs. I install beta/New versions on a copy of these files to test before switching.
I'm not stupid....thanks
Sent from my HTC One using Tapatalk
No to verisuft. But have managed to solve it. Not sure the exact cure. But if you look in the shared folder with Windows, search for tool manager. And basically restored some backed up files that had been replaced by X8 beta install.
If you want more info let me know and I'll sit at the comp and give exact details
Sent from my HTC One using Tapatalk
I'm wanting to add the tool projection from the holder into my report. I know it can be seen in the image but I like it as a tool list, saves pages. So does anybody know the string to read in that data?
Cheers
Ben
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.