CycleTime [2021] .zip

CycleTime for Mastercam with the help of chook here is my example of cycle time for an Okuma LT lathe OS1 ( Werkzeugtabelle TOTAL CYCLE TIME 04:19 ) (N03 >> T0303 R0.8 G96 S50 F.100 M4 |00:48| WZ-16P-D20-IN-VOR-R0.8 ) (N02 >> T0202 R0.8 G96 S250 F.170 M4 |00:30| WZ-2-L R0.8-RS ) ( >> T0202 R0.8 G96 S50 F.100 M4 | | WZ-2-L R0.8-RS ) ( >> T0202 R0.8 G96 S250 F.220 M4 | | WZ-2-L R0.8-RS ) ( >> T0202 R0.8 G96 S250 F.250 M4 | | WZ-2-L R0.8-RS ) (N04 >> T0404 R0.4 G96 S280 F.080 M4 |00:20| W24-W5-R0.4-L-A-STECHEN ) (N10 >> T1010 R0.4 G96 S50 F.070 M4 |00:14| WZ9-D21-IN-VOR-KONTUR-R0.4 ) (N05 >> T0505 R0.4 G96 S50 F.100 M4 |00:36| WZ67-D20-MINU S20 GRAD-R0.4-SR ) ( >> T0505 R0.4 G96 S50 F.050 M4 | | WZ67-D20-MINU S20 GRAD-R0.4-SR ) (N06 >> T0606 R0.4 G96 S200 F.120 M4 |00:32| WZ-102_R0.4-SL ) (N08 >> T0808 R0.8 G96 S250 F.200 M4 |00:08| WZ-3-L-A-SCHLICHTEN-R0.8 ) (N09 >> T0909 R0.4 G96 S130 F.050 M4 |00:18| WZ67-D19-MINUS20-GRAD-R0.4 ) (N11 >> T1111 R0.4 G96 S130 F.100 M4 |00:04| WZ-19-80-D20-L-R0.4 ) (N092 >> T0909 R0.4 G96 S130 F.050 M4 | | WZ67-D19-MINUS20-GRAD-R0.4 ) (N15 >> T1515 R0.0 G97 S3183F510. M3 |00:49| 16 SCHAFTFRÄSER ) G0 X600 Z600 G50 S2500 N03 ( Werkzeug -- WZ-16P-D20-IN-VOR-R0.8 ) ( Halter -- S10M-SCLCL 06 ) ( Platte -- CCMT 09 T3 08-MM ) ( Innen Schruppen Kontur Anschluss ) G0 X600 Z600 T0303 VLMON[VETLN]=3 G97 S796 M63 M04 ... ... CycleTime.zip

The setup sheet always uses the same name (just as you called the machine) to create a file. Do you can create the file under other names automaticly eg. Mastercam file name ?

The setup sheet always uses the same name (just as you called the machine) to create a file. Do you can create the file under other names automaticly eg. Mastercam file name ?