Can't win them all.

yeah i figured something like this... i already bought the tool because this is a test lot and we probably get more.

yeah, just figured someone out there might be doing it for 5 pc. orders to save on tooling.

No guess no luck than

Howdy, Has anyone ever had luck Surfacing O-RIng Ports? AS5202

i just find it CRAZY that isn't defualt for fanuc

fs2 4 1 0 1 0 #Integer, not leading fmt "P" 4 dwell$ #Dwell

dont worry im in a safe space.

I can dig it.

How do i change the dwell in my drill cycle to out P1000 with no decimal point. I take it I have to use a Format Statement , somehow, to get this to work, or possibly not. I read some of the post documentation but it just left me dazed and confused. Attached is my post...#CMPEDIT are all my changes so far...I'm dowloading MPMASTER now to see if they have a switch built-in. Forgive my terrible lack of programming knowledge I am learning slowly. Generic Fanuc 3X Mill.txt

Program check is something i only ever used in memory mode. When i hit check during a cycle it allows me to see distance to go and modal commands on the left along with the program lines on the right.

I think I'm going to restart this post with mpmaster. Piece of junk HMC 3axis post got me all screwed up... thanks for the help guys

I've had that set at "break at quads" for all planes... Really strange linearize does work but if i can't tell in a backplot like cimco which path will gouge than I'd have to do the whole program. My boss seems to think it might have something to do with modal commands for arcs.

I changed this setting in control def. from .0001 to .005 and .010...the output was identical lol using beyond compare. So i don't think this is a cure all

Cool i'll start at five...