I was curious if there is a way to not have comment$ grab the operation comment for scomm$ and away that I could have it output (the operation comment) where I would like without interfering with manual entry comment? The N999 is a point path then there is a manual entry after that prior to calling up a tool change for the next tool. This is Okuma MA600 as well. (MOVE TO HOME FOR PROBE CHANGE)<--This is the operation comment..But because of comment$ it is placed here instead of below my N999 CALL O9018 PJ=2002. NSTART IF [VC15 EQ 1] NOP20 (IF NO PARTS LOADED IN OP 10 SKIP) N999 [would like operation comment to be here without moving comment$ since it also controls the manual entry ] G90 G30 P1 G20 G90 G80 G40 G0 G116 PT=999 PQ=250 (T999 - DISC PROBE MA - TOOL DIA. - .4727008) G15 H1 G0 G90 X50. Y50. B0. M20 S0 M5 G56 HA Z50. TLFON M5 G30 P1 TLCO Q1 M01 ()******************************************************* CALL OPR01*********************************************** IF [VC15 EQ 1] NOP20 (IF NO PARTS LOADED IN OP 10 SKIP)** these 3 lines are manual entry for the next tool M01 (ROUGH CUT RAISED FACE OD B90 SFM 2395 FPT.004)<--This is the operation comment..But because of comment$ it is placed here instead of below my N250 N250 [would like operation comment to be here without moving comment$ since it also controls the manual entry ]

Thank you for the response. I like what you have done but I wasn't wanting it to be output to a report I was wanting to output the data from that form to the post and have the post output the data to the program. I have since been working more closely with my reseller and they have developed a way to output the information that I want albeit not from that form but via one that they have created as well. Again thanks to everyone for the help it is always great to see a community come together to help each other

Is it possible to use the fields that are in the setup sheet GUI to output via the post? I am wanting to put them in the headed of my machine program. I have scoured my post files I have gotten when I took the class our reseller did for us a couple of years back and haven't found where the field names might be. Thanks in advance Added a picture to clarify if anyone needed it