Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Totaly agree feel like i have been trudging through mud for a few weeks now , Yesterday had a full 10 hours of productive time and good breakthroughs feeling quite chuffed.
I'll keep you updated on how i get on but I think we have (this issue at least ) licked
yea i get that had a good win today, i think it may be post related output a similar function and the plane shift line had the same specs as the sample I posted but the b and c moves where wrong B-15 {should of been B15} and C180 {should of been C0}.
but then on another example of the same procedure just on a different plane it appeared correct. in the first instance I corrected the B and C moves and it ran fine. {haven't proven the second and third instance yet} So i guess I'm going to keep building an information bank to give postabilaty a fighting chance of working out a viable edit.
so I tried plenty of different setups with the G21 and only got worse results, it appers only one axis is being rotated and from what I read in the programming manual the code should be right. I'm wondering if it's a control setting or parameter may not correct, that's why I'm trying to find some Fidia guru's to pick there brain.
Fidia have been great for tech support but with the time zone and language difficulties i thought I would cast a wider net.
in relation to the kinematics will my machine def have a bearing on that ?
yea for the most part. the learning curve is flattening out a little still heaps of head scratching going on as i don't have anyone in the shop to teach me. And to make it harder I keep getting all the curly " that will easy as on the 5 axis" job's
any of you 5axis guys got any feedback about this one
Hey guys any of you got any experience on Fidia C10 Stuff ?.
We have a retro fitted Okuma 5 axis with a c10 and I'm just looking for a few guys with a bit of a knowledge base to help me out. I have got 90% of my day to day and regular driving sorted out and quite happy ..... but I do still have a few questions, and when I do get stuck it can be a real grind trying to find solutions as there is not a lot of practical solution's to be found online.
The main issue I'm having at the moment is with my g20 g21 program rotation doesn't seem to be working correctly. the rotation of the plane shift shows up in the ROTANG {program rotation} dialog screen but when the program runs the axis shift doesn't seem to be correct.
N230 G00 X0. Y0.
N240 G00 Z150.
N250 G00 B90. C0.
N260 G00 X147.08 Y6.406
N270 G21 RX90. RY0. RZ90. CX0. CY0. CZ0.
N280 M155
N290 G00 X6.406 Y8.137 S3400 M03 M08
N300 G00 Z147.08
N310 G00 Z127.08
N320 G01 Z119.586 F200
N330 G01 X15.341 Y11.903 F1220
N340 G01 X17.073 Y12.633
N350 G03 X18.866 Y13.839 I14.889 J17.816 K17.08
N360 G01 X19.714 Y14.385
N370 G01 X21.118 Y15.097
I'm not sure if the plane shift and following code @N270 are correct ? i would of thought the Y would stay the Y and X and Z would be switched?.
Could one of you more worldly gent's please take a look and help a brother out.
I have added a zip2go of the file the tool path in question is the 90 deg facing cycle towards the end of the part.
140401-100-01.ZIP
Thanks for all the feed back guys the only issue was with my re-seller getting the info through. we have got some great traction now that our edits are getting to postability, every edit has fixed every issue we have had so far. big up's
I to have been really underwhelmed by our service too. we pay top dollar and get bugger all and made to feel that we are lucky to get what that.
e-mailed prosoft (our rep) friday morning about the issue got a reply late Tues.
The reply didn't even relate to the post question! i only got a hard sell on some mastercam-u papers. so frustrated
is any one here versed in FIDIA code ?
Yea nice thanks, I thought as much.
So for that stuff would you just set up a plane as I have and just for arguments sake do a peel mill and set wcs top, T & C set to plane XXX ?
Hey guys just setting up our new okuma post looks ok so far. But on tool calls it outputs M6 T.1 . how can i remove the . before the the number is that a master cam setting or a post issue ?
Hey guys i'm setting up a roughing cycle with opti rough and can't get it to see any stock got me stumped ??
could some please have a look and see if they can see what i'm doing wrong. I have done this type of stuff countless time's but seem to be stumped
WELD TEST.mcam
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.