Hi Colin, Thanks for the info.

Hi Colin, As you told me, i found this line in my "pwrtt$" post block, if tool_table = 1, ptooltable I inserted "t$>0" into this line, if tool_table = 1 & t$ > 0, ptooltable and it post perfectly, % O0005(CAMERA) (DATE=JAN,02,2015 TIME=18:40) (OKUMA-OSP200M) (T17|5. SPOT DRILL |H17|D17) (T9|10.5 DRILL |H9|D9) (T50|10. FLAT END MILL |H50|D50) (T41|10. FLAT END MILL |H41|D41) Thanks a lot sir.

Hi, I have a problem with my Tooltable Output. It shows as, % O0005(CAMERA) (DATE=JAN,02,2015 TIME=02:20) (OKUMA-OSP200M) (T17|5. SPOT DRILL |H17|D17) (T9|10.5 DRILL |H9|D9) (T50|10. FLAT END MILL |H50|D50) (T-50|10. FLAT END MILL |H50|D50)========> Don't need this line ! (T-50|10. FLAT END MILL |H50|D50)========> Don't need this line ! (T-50|10. FLAT END MILL |H50|D50)========> Don't need this line ! (T-50|10. FLAT END MILL |H50|D50)========> Don't need this line ! (T-50|10. FLAT END MILL |H50|D50)========> Don't need this line ! (T-50|10. FLAT END MILL |H50|D50)========> Don't need this line ! (T-50|10. FLAT END MILL |H50|D50)========> Don't need this line ! (T-50|10. FLAT END MILL |H50|D50)========> Don't need this line ! (T-50|10. FLAT END MILL |H50|D50)========> Don't need this line ! (T-50|10. FLAT END MILL |H50|D50)========> Don't need this line ! (T-50|10. FLAT END MILL |H50|D50)========> Don't need this line ! (T41|10. FLAT END MILL |H41|D41) (T-41|10. FLAT END MILL |H41|D41)========> Don't need this line ! (T-41|10. FLAT END MILL |H41|D41)========> Don't need this line ! (T-41|10. FLAT END MILL |H41|D41)========> Don't need this line ! I only need one line of each tool. But i think because i used multiple pass, it posts like this. Can anyone help me with this? Thanks in advance.