xeyedsurfer99
-
Posts
11 -
Joined
-
Last visited
xeyedsurfer99's Achievements
Newbie (1/14)
0
Reputation
-
FILE BEGINNING/END MARKER MISSING - ALARM
xeyedsurfer99 replied to Rodney714's topic in Industrial Forum
1ST line is blank, and 2nd has the %, 3rd is O0001 ? -
Is this auto "first, second, and last point" selection method, still possible when selecting drill points in versions since X9?
-
Gnomon not displaying during image capturing for MC2020
xeyedsurfer99 replied to Compaq007's topic in Industrial Forum
This was causing my Show Axes (F9) to not work as well. -
Would doubling the number of drill points and alternate between G80 and G81 each successive hole work? (are you trying to avoid a hub diameter).
-
Can you please screen shot or explain more, I'm not seeing it.
-
I think you need to instate g54(or other referenced offset) before the dynamic takes place.
-
move to next entry field, with enter
xeyedsurfer99 replied to xeyedsurfer99's topic in Industrial Forum
Thanks for the reply! -
Is there a setting that allows the cursor to advance to the next field when you have hit ENTER? For rectangle creation, I believe in older versions (v7), when I entered data into width, it moved the cursor to height field upon the Enter key.
-
The solid has been re-worked a couple times and has caused either 3 or 4 levels of .010" slices to be partial, yet the edge should be at one elevation.
-
Attempting to use Curve Slice but I am missing lines at the area of transition between a curved an vertical wall. Is the problem from the imported solid or a tolerance setting in curve slice I am missing. Slice is at .010" and missing some lines from 4 slice levels. Thanks in advance.
-
Can I "loosen" up the distance to my snap point for creating geometry and or selecting items in 2019? Fighting to have the snap point or entity stay highlighted long enough to click it. I see in this video by Matthew Hajicek at 1:30 ,the same struggle I am speaking about.