Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
I'm not sure what I hit to get this box to popup when I want to analyze an entity. I haven't seen it in ages.
Can someone remind me how to stop it from popping up?
Here is an example of my problem. I took a screen capture of both the square and the circle. I want each on their own page. Look at the "Image List" page and they are both on the same one.
SETUP SHEET TEST.pdf
Ron
I have been trying to modify the template. I have been doing pretty good on getting the "General Information" and "Tool" stuff the way I like. I don't know a lot about how it works but have been trying to teach myself. My goal is to have 1 full size capture per page. I can get somewhat there but fist capture may be towards bottom of the first page and the next capture towards the top of the next page etc.
Hi All
I am playing around with Active reports. Can someone help me out with getting my screen captures to show one per page. Right now it is fitting 2 per page.
Thanks
Mike
MrFish
Nice looking toolpath but I think that will give me my same NC length issues as the peel mill. And I have to try and keep my cycle time down. I need to make a 100 of these parts.
Thanks for taking a look!!
I just ran a test peel mill path at the machine. 22000 rpm 115 ipm .010 step over. with a 3/32 EM
The machine feedrate never made it above 30ipm. I think this is a robodrill thing. If it were much faster the machine would shake way to much for my liking anyway.
It took approx. 7 min for 1 slot. and the code took up most of the machine memory.
I attached the test file if someone can take a look and maybe give me an idea if I am doing something wrong.
TEST.MCX-7
Sorry the material is 6061 alum. I will probably go with peel mill just want to see if there are ways I'm not thinking of that may work as well,
Thanks
Hi All
I'm looking for suggestions for the best (fastest) way to mill these fins. The spacing is .130 x .646 deep. I will be running it on a Robodrill with 24K max RPM.
I tried a peel mill path with a 7/64 EM but the code was way long.
Any ideas would be appreciated.
Thanks
Mike
TEST.MCX-7
John...just tried it but it did not help. I deleted the config again then rebooted my pc and still no difference. When I close there is a short delay up in the lefthand corner of the screen next to SP2 it says not responding another short delay then crash.
Sorry for the delay getting back. I have been running X7 for about 3 weeks now. This issue just started out of the blue this week. Yes I can just open Mastercam, do nothing go to close it and it crashes. This happens every time.
Thanks got it to work.
To answer the original question I use WCS exclusivly. I design all the fixturing for the parts I program in SW. So when I bring my assembly into mcam from SW I just set my WCS to what ever I need to program.
The fixture, clamps ,part etc
This way whenever I need to make changes in SW to the fixture or anything in the assembly it comes in to mcam in the same spot as the original file. This makes change recognition very simple.
Don't mean to hijack but....
How do you export out of SW? I have never used the co-ordinate system in SW but think I got. When I open it in mastercam it comes in the original orientation?
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.