New Installation, but had been running 2018 on a different pc. First time to access Tool Manager. I can load a library, but double clicking on cutting tools to bring up a list in the center window, crashes the application. Tried two different libraries, same result. Task Manager reports ToolManager.shell is "not responding". Barry in St Louis

Oohh... Good one!

Hey HTM, Can you change surface normal on a single surface in a "two-surface" flowline path? I can reverse them, but they both reverse, regardless of selection order. was just sitting here pondering your response... Barry in St Louis

Master- Break the path into 2 flowline operations, or create solid geometry to machine to. Here was the quick fix. 43329 plug.mcam

Yes, pullo, thank you. I have mine set at 250%, which Windows indicates as "recommended". I tried lots of changes there, early on. QTE reported that MasterCam is aware of this 4k resolution issue, and will release an update to address it. Barry in ST Louis

My local reseller had a fix. It's still ugly, but fixed... QTE is great, just ask for the pdf. Barry in St Louis

I was beginning to suspect graphics card. I'm glad you chimed in. Thanks, Barry in St Louis

Here's mine set at Tacoma, Regular, 14

Hey gcode, The icons still look small to me. I've been to options and "small" is really small. Any ideas? Barry in St Louis

Thanks, gcode Barry in St Louis

Millman got all my preferences over except the size of my Operation Panel. Take a look at this. That is the large icon option. Barry in St Louis

Thanks, Millman Barry in St Louis

Where is my preferences file located in a standard install? Icon placement, context menu selections, Background Color, etc. I have 2018 running on both machines. Just want to steal my preferences from the old one. Barry

Where is my preferences file located in a standard install? Icon placement, context menu selections, Background Color, etc. I have 2018 running on both machines. Just want to steal my preferences from the old one. Barry

Thanks for the G50 advice. I'll try to plug that in a little later. As for retraction protocols, I don't see how simultaneous homing is any safer than x first? In fact, I find it more likely to clip the tail stock. Help me understand where my logic is flawed? Thanks, J Barry