Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
I got it but there might be an easier way ha ha. It is .25 wide and .136 thick and just needed to go from the one plane to the other for random pattern breaks in a pool cue design. Thank you for the help guys. You are great.
I tried generic Fanuc, MPRouter posts but keep getting error numbers that won't let the program run. Error20 Error24 Error33 Error9. The working sample runs, the other is mine and has errors as shown in the last program from Candle. I'm sure this has been a topic before. Thank you for the help.
working sample gcode.nc
EMASTERTEST.NC
emastererrors.nc
I bet the lead in/out is the problem. And or the ramp also, as Reclinerman said. Try running it without those active, and set your Z above the material and watch the cut path.
I got it, guys, thank you for the help. I used Create Surface, Swept with 2 rails. I picked the top profile, and the beginning of the neck profile. My two rails were one side, down from the top profile, and the curved line in the middle. I then mirrored the surface, and used the split surface tool to clean up the excess.
What is the best way to get the surface to follow the curve to the top. I have been playing with create, Surface, swept, but it just gets close to what I need. Thank you all.
2015 GUITAR.MCX-6
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.