Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

eltklas

Verified Members
  • Posts

    98
  • Joined

  • Last visited

Everything posted by eltklas

  1. I have a question about the numeric parameters. Can I asign a value or I only can read It?. Thank you
  2. I already have it, it was difficult for me but I found it by reviewing the wire parameters one by one. Also I don't speak English. Thank goodness the names were clear. Thank you
  3. I need to know the name or the numeric value of the red colors options in the wire contour options. I have search in the post documentation but I didn't find it. Does anybody help me?. Thanks
  4. Is possible with the free version of Visual Studio? Or do you need a specific version?
  5. I want to learn to do that type of scripts, Do you have any information to read about?. I searched but I didn`t find nothing about that. I program in Visual Studio with Visual Basic .Net I think it is really good option to customize the program Good Job
  6. The error is for because a string value is out of the list. I had some similar error and it was the problem. You must find wich one, but I would start for sgcode and sgabsinc Or some misc value can be too Good Luck.
  7. Thanks, I wiil try if can I use for my problem. Thanks
  8. Hello to all. I know that wire is not the most used. I need the next thread point, but I have a problem, If I have only a chain in the current operation when with opinfo (14008 and 14009) I get the new point all is correct, is the new point. But the problem is when I have some chains in the same operation, If I get the next point It returns the next point for the next operation too. I need the next point if it is a new chain in the current operation or if it is a new chain in a new operation. I hope you understand me, sorry fot my bad english
  9. I have already the post, but it doesn't work well, I don't know if we have a configuration problem in Mastercam, but the machine doesn´t load it. Who do Have I to contact, you or my reseller? Thanks.
  10. It's ok, we use uniqua system, and the jobs files are JSON, but we are try to use the older file MJB of the C550 while get the correct post. Is there any post to uniqua in JSON? Thanks
  11. Thank you for your attention. But something about this topic?. any help for to work with external files and debug them? Thanks again.
  12. I have yet paid for the post, but all that they send doesn't work. Thanks for the information. I feedback it. Can I talk with In-House or Postability directly?. I think my reseller doesn't want to solve my problems. The post is for WIRE. Thanks
  13. I don't understand how mastercam reseller system work. Before to buy the new machine we asked to our reseller if is there a post that works well in the new machine. Agiecharmilles CUT P550 Pro. The said yes, then we bought it. But at the end they didn't have. The reseller send us all posts of the tech exchange that have similar name (encrypted of course) but no one works well. We know that in other countries (we are in Spain) there are post of mastercam working well we our new machine, but they can't ask for one to other reseller. We can't ask to other reseller then we are thinking to change cam to Fikus. They have a full operative post. I am so sad for it, i am using mastercam for 25 years, we actualize to 2023 version, but all for nothing. I am searching the way to do by me self, but the file is a XML file and it is new for me. Thanks to all
  14. Good morning. I'm trying to modify the generic post GMFS C350 for wire, obtained from the Tech Exchange for 2023 version, but there is a problem that it uses an EXT file and another LCC file and then merges them into the final file. The problem is that the debugger only shows the lines starting at 109, and I don't know how to debug the previous lines. I send a zip2go in case you need it. Thanks and best regards 030087_A_DOS PIEZAS_550.MCAM-CONTENT
  15. Thank you, Works well. But I thought that in the new versions from 2017 we would not have to use that old way since they added opinfo and the parameter tables. Thankks for your quick response.
  16. I tried with rpar(sm_offset,2) and other positions and always, return 0. I am really lost. Thanks.
  17. Hi to all, I need to select parts of a string. That value is from a parameter table: 20200 sm_offset --> 0. 0.238 0 0.125 0.113 1 1 The result is a string and I need separate the different numbers to others variables, is the same string or numeric. I have tried the string select functions but no results for me. grpix( ) setseloffs( ) setselrtn( ) setselsel( ) setselsiz( ) setselund( ) updstr( ) regex( ) scan( ) strlen( ) strstr( ) ucase( ) iI think the regex() is the correct, but i don't know makes it work. for search a number you need this s_anynumber : "(\+|-)?(\d+\.?\d*|\.\d+)" But no results. Has anybody any example for this topic?. Thanks to all and sorry for my English.
  18. Is possible to program an script or vbs or something similar? Thanks.
  19. In a few days I will use 2023 version, but someone tell me that I can't to migrate the mcam files with the migration utility becvause the X9 isn't in the list, only 2020, 2021 and 2022. How can I migrate al files together ?. Thanks. sorry for my English
  20. I`m looking information to create a "Tech" file for my new Wire EDM machine, but I don't find any information about that topic in the post documentation. Is there info in other site? I'm using now X9 and the reseller wants 9.000$ for actualize and the new post. I think it's too expensive and I will try to do for my self. Thanks to all for your help. PD:Sorry for my English
  21. Yes, I know that solution. Thanks. But if it is possible I should find a way to do that in the post. If there are some different names it generates some files NC. Really it is not a problem, just curiosity. Thanks
  22. Hi to all, Sorry for my english. Is there any way to know if all operation have the same name?. When one or some operations have diferent name, it generate some NC files. The parameter 15107 is the NCI Output Destination File Name, but if I try to read in pwwrt$ is the same, some diferents files. I want to make some code to exit post and show that not all operatios have the same name. When do I have to read de opinfo value? Thanks to all.
  23. It keeps going wrong. I tried using the construction plane matrix cm1$-cm9$ but I cannot understand how it works. In the documentation he explains the variables but not how they work. Thank you for the effort.
  24. Sorry for the delay in responding, but it doesn't work either. I have tried with: tox$ -y -z tox4$ - y -z t_orgin_x$ - y - z corgx$ - y - z But none of those variables store the coordinates of the construction plane within a multi-axis operation. Sometimes the values coincide and sometimes they don't, and other times they appear but with changed signs. Any help will be welcome. Thank you

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...