You guys that can use two mice at a time are definitely bad-xxxx.

Thanks again for your input. Anyone who wants to give mouse  gestures a try

Mouse wrangler is a free program that works pretty well and gives you eight gestures.

It worked in previous mastercam versions but I can not get it to work with 2021.

Thank you Metallic for your advice. I didn't think I was blaming mastercam for anything. Seems like a

reasonable question to ask. Mastercam is always adding and taking away. Wouldn't think it to be to

difficult to add to software. I do not understand why sir you included the customize menu in your post. 

I am way to uncoordinated for a space mouse. Thanks for your replies. 

Will mastercam ever include in their software mouse gestures?
I am surprised that no one complains about this feature missing. 
My workflow would be improved tremendously.

Make one gesture and screen would go to isometric - fit screen instead of right clicking
twice.

The problem was the video card. Computer is a new windows 10 install.  Windows did not

recognize the Nvidia Video Card.  Had to download Nvidia GeForce Experience. After download

and running the software recognizes your video card and downloads

the correct video driver.

I was to impatient to wait for the search in mastercam forum. I found a post that it might

be related to video card.

Masteram 2021, while using Dynamic Plane mastercam locks up  while trying

to exit  after successfully setting up a new wcs, tool plane and construction plane.

Thanks Guy's for the great information. They found it today. One of the guy's took it home 

at the last minute. Steps have been taken to know where and who has a hasp. Unfortunately

I will have to wait until tempers ease and work picks up until they will need me.I shared all

your replies with the managers there. Best forum of any kind on the internet.

Thanks for your reply. The company is mostly manufacturing with no computer people that I am

aware of anyway. If mastercam is downloaded onto a computer can't mastercam see what hasp license

is attached to that seat? 

I program for a company maybe once a month for a couple days to help them stay on schedule.
When they need me I stop and pick up a hasp and program from home. When done I drop off the
hasp asap.
This process is needed next week but they can not find one of their hasps (they have several) and
suspect foul play. I told them to contact mastercam support and they will. Is their a way to locate the
whereabouts of the hasp through mastercam?
Thank you!

Closed mastercam and restarted. It works! Thanks everyone!!!

Almost there. Thanks for response. I did as htm01 suggested and when I ran

chook from mastercam it said "Functions available via customize". Started customize and 

looked everywhere for it and i can not find it.

I tried everything mentioned except for the unblock. Hate to admit it but I do not know if

it is blocked or how to unblock it of it is.

Thaks to everyone who responded. 

I can not get it to work.in X9. Run user application view fit.dll - result = invalid user application.

Thanks anyway

This is the best add on to mastercam and I have been using it from the mastercam x version.

I need help getting the add on to work for version X9. 

Thank you.