hoa75nguyen
-
Posts
35 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by hoa75nguyen
-
Update window to 64 bit
-
Thanks for your help Colin. I am really appreciate it!
-
Hi everyone, I am trying to learn 4axis toolpath but I run into this toolpath that I have never see before or how to create it. Could someone show me how this toolpath was created. Thank you!
-
Post with more then one work offset
hoa75nguyen replied to hoa75nguyen's topic in Post Processor Development Forum
Thanks for the help, I solve the problem by creating a new wcs. -
Post with more then one work offset
hoa75nguyen replied to hoa75nguyen's topic in Post Processor Development Forum
Hi Nickbe10, I try but the work offset unable to stick to the number that I assign to. Thanks for your help
-
Hi everyone, I am trying to learn 4 axis rotary milling. Everytime I posted with mpmaster, I have three different work offset? Is this have to do with the post or machine definition control? Thanks for the helps
-
Hi everyone, I have an old Post from Version 9.1 and I wanted update it to 2018 version. it there a way to do it? Thanks so much for the help!
-
Thank you for all the tips! I used RaiderX advice, .5 with .01 work like a charm
-
Hi Everyone, I am cutting a profile on alum. sheet .125 thickness. Just wonder how long and thinkness of the tags to leave it. Thank you
-
Hi Everyone, Does anyone know how to turn on a haas vf2 coolent noozle in parameter? I cannot access or highlight the coolant position in tooloffset page. Thank you
-
.nc file will not work, change your file to .txt. That will work
-
just wonder does anyone leave .005 on the floor and come back with a finish path or none? what is best Thank you
-
I would like to said Thank you for all of you guys help! Happy New Year everyone!
- 1 reply
-
- 1
-
-
Genereic Haas post, N# only at tool change
hoa75nguyen replied to jlw™'s topic in Post Processor Development Forum
Thanks! -
Genereic Haas post, N# only at tool change
hoa75nguyen replied to jlw™'s topic in Post Processor Development Forum
I am curious, I thought mpmaster post is for fanuc control? -
Hi David, I did what you said and it load without error. But I was afraid what will impact with the part at the end. Thanks
-
Thank you for a quick response! I will try it out
-
I just wonder does anyone run into this error when startup mastercam? or know will effect to the programing at all. Thank you
-
After I update 2 for mastercam 2017, a message at the bottom of the screen said "waiting toolpath disk....." when I make a new toolpath or a dirty operation. Have anyone run into this after update 2?
-
never mind, I find out what i did wrong. Thanks
-
Hi Everyone! I am using mc 2017, I was able to pull my own logo on the sheetup but having a problem removing the orignal logo that stack right on top of my logo. Any idea or advise to remove it. Thank you
-
Hi Everyone, After I update mastercam 2017 to mastercam 2017 update 1, the Plunge rate no long able highlight or make changes. Is that a setting that I could change to make it highlight again? Thank you
-
thank you for the tip, i will do that
-
How do i analysis counter sink degree on a solid in mastercam 2017? Thank you
-
Thank for your input! yes, would be a big booboo at the machine if someone doesn't do the setup right.
