Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

mig

Verified Members
  • Posts

    852
  • Joined

  • Last visited

Everything posted by mig

  1. Ok , I know . Thank you
  2. Hello , How to activate this option (toolpath preview).? Thank you
  3. Hello . Recently machined shat off on the mold insert . Got gauge on vertical wall . Mastercam ver 2022 Any one has the same problem?
  4. Hello everybody Please remind me how to to set (indicate ) " heavy tool" to slow down tool change on Okuma osp 7000 control ? Need to put index "m" like tool number 003M Completely forgotten.
  5. Hello Everybody and thank you for the replay , I have password protected the parameters (3202.4 or NE9) by previous users . You are absolutely right . And machine old .
  6. Hi Everybody , Would like to ask if some one has the problem similar with us . We got some older Okada graphite machine . We would like to modify 09001 program for tool change , to do this we suppose to change parameter NE9 , but control not allow us to do it . Any idea how to solve the problem ? thank you in advance
  7. Hello again folks . I figure it down Every thing is Ok now . Thanks
  8. Hello , For some reason my machine stopped on the middle of tool change cycle (sec step 12) and i cannot to return back to start of the cycle in manual mode . Please give any advise if you have an experience with this problem . OSP P200. Is it possible to finish the cycle by pulse handle ?
  9. T_MALENA , this is what I asking where exactly in I/o I can see which switch tripped exactly? I can't find instructions in the book
  10. Hello , Okuma gurus ,please help! We got the alarm "1704 alarm a stroke end over " . Problem is non of the axis not on limit switch physically as i can see. How i can check in the machine control diagnostic ( e100 control ) which limit switch is activated ? Thank you
  11. Are you sure you need the % marks ? This is Okuma not Fanuc
  12. Hello Okuma gurus What parameters i have to change to be able to do tool change by pulls handle ? Thank you in Advance
  13. Hello . Sorry guys for stupid question . I guess was some option to create one big island geometry from many small islands. Is it true ? Any idea ? Thank you in advance
  14. hello Hide/unhide (alt+e) option stop working suddenly /occasionally , and starts work again after restarting the file . Anyone has the problem ? what solution ? thank you in advance
  15. Hello. Anybody can give me an idea why after backploting operation (s) and turning off the backplot option all backplot traces stay on screen ? thank you
  16. Thank you Colin Invert selection - exact what I looking for
  17. Hello I am using short cut key alt + E to live on screen one entity and hide all rest . How to hide highlighted entity and leave all rest on screen . (Stupidly forgot) Thank you in advance
  18. Hello Trying to move the model in mc 2020 and gating massage (look at picture attached ) Same model on 2019 acting OK .
  19. mig

    mc2020

    hello just installed mc2020 on my brand new ASUS laptop. MC lunching with : (please look at picture) How I can fix the problem . Thank you in advance
  20. Hello Used just conventional loop mode for chaining solid . And also did it on mc 2019 and got same results. Also I changed diam. of end mill Looks like we have some issue with solid chaining
  21. Hello , If you look at attached pictures on top - chained as solid and on bottom picture chained as wire frame . You can see the deafferents . This is Mastercam 2020 pb4 . Looks like a bug .

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...