Hi 3DGee, The stock to leave in all the 3d toolpaths are found in the model geometry page. Hope this helps

Hi all, I am trying to get a logo to import into mastercam for me to machine on a part, using Rast2Vec.DLL however it does not appear to come out how i want it to with a lot of lines where there should be arcs and not very smooth, Any help would be appreciated Thanks

Not sure if this is the correct place to put this or not, I have a log in for the mcam website so that I can access the downloads page as we don't have the USB. when I log in it goes back to the home screen but doesn't actually log me in, Any ideas how to fix this? Thanks

Thank you both for your help, I have managed to move the solid model, another thing I am having an issue with is mating the parts, I am using 2018 at the minute and position looks like the easiest way to go for this, is there a better way to do this as the model needs to be moved after the mate. Thanks again

Hello, I have a fixture with 2 parts on a op10 and op20, I have created a stock model from op10 and want to move it to OP20, I haven't been able to do this using transform as there are no edges to select, is there an easy way to do this? Thank you

Found the solution, it appears that I had updated my windows which also updated my graphics card, I had to roll back my graphics card and then it would work fine.

This is what comes up, it doesn't go away.

Hi all, I have both 2017 and 2018 installed on my computer, when I go to open either of these it loads as normal and then only says initializing menus, I really need this to be working for next week as have some work I need to do on it. I have tried deleting mastercam 2017 and then reinstalling but this appears to have made no difference, first 2017 went and now a month later 2018 has also stopped. Any ideas would be greatly appreciated. Thanks