Leon82
-
Posts
2,189 -
Joined
-
Last visited
-
Days Won
11
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Leon82
-
i have x and y dialed in to bout .0001 on all 4 sides all five sides are faced and the tool offset is dialed in within .0001 i cant get this number to move, what parameter is it? the holes are .0007 too close to the top face moving z , the 70mm offset and half offset does nothing except make the tool offset different.
-
not since going to 2023. its is a pain because i have to get the system admin password every time , multiple times and only two people have it -
Probing with Twp would probably work if you have it. Otherwise you could do some math with variables and the center of rotation. We use mastercam drill cycles for probing
-
Yes years ago I ended up with a custom bolt circle
-
If you move you mouse and accidentally hit the wheel as you pass over it could change them inadvertently
-
you can wire edm a slot gauge so it can't be forced in like a pin or trim a gauge block to fit
-
corollate it with the cmm or deltronic pins. if its aluminum switch to a silicon nitrate probe. it will build up on the ruby
-
the top one had keep tool down for finishing the bottom is keep tool up i came back after lunch and the machine said modal out of g40 Ill see if i can strip the file , on 2023 update 3
-
Use inverse for rotary.
-
Solid Carbiude Slitting saw
Leon82 replied to AMCNitro's topic in Machining, Tools, Cutting & Probing
What diameter? Internal tool has some big thin ones braised to a hss shank -
Do they still have the x20 increment for the handle feed? That was pretty cool moving 2 inches per rev
-
Probably ok with a dynamic path.
-
It was installed with the Camplete installer when we updated
-
you can use quotations to post directly what's in them in the tool change block before pcan result = newfs(15, feed) #Reset the output format for 'feed' pbld, n$, *t$, sm06, e$ pindex after pbld, n$, "G28", "X0", "Y0", e$ pbld, n$, "G30", "X0", "Y0", e$ pbld, n$, sm01, e$ result = newfs(15, feed) #Reset the output format for 'feed' pbld, n$, *t$, e$ pbld, n$, sm06, e$ pbld, n$,sm01, e$ pbld, n$, "G28", "X0", "Y0" e$ pbld, n$,sm01,e$ pindex
- 5 replies
-
- 2
-
-
-
- tool number
- t1
- (and 7 more)
-
Move program name below program number in post
Leon82 replied to Odin's topic in Post Processor Development Forum
I think That will cause the program name not to appear in the machine directory . -
Move program name below program number in post
Leon82 replied to Odin's topic in Post Processor Development Forum
looks like line 2173 put an e$, after progno$ and create a new line with the proper spacing for the name -
Down and dirty contour with tapered walls
-
APparently the customers require lots of cyber security stuff.
-
we network save also.
-
the first icon on the left under the drill point box is the mask on arc. click it then pick the arc then window the area
-
i click it sometimes and it shows it pressing but nothing happens. it also won't save the file when it does this.
-
NCI is faster. geometry has a noticeable processing time
-
I don't believe so. Back in the before time you could change their origin and it would mess up all the other planes.
-
You can make a manual entry and add it to the transform op for a quick workaround?
-
has anyone used them? how are they? they appear to be owned by IMC they bought CID tool and seem to have shut down production who we have been using.
