Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

PacificMachinist

Members
  • Posts

    4
  • Joined

  • Last visited

Everything posted by PacificMachinist

  1. Hi Daxman77, After you have selected the contour tool path type there is an option under the cut parameters tab on the right side that states contour type and in that drop down you should have 2D, 2D chamfer, RAMP, Re machining and oscillate. If i am wrong please correct me, as i am not sure how to check what i have, but believe i do have router 1
  2. Hello Ajmer, Knowing myself I double checked to make sure I hadn't hit those buttons, due to the fact that I am an impatient clicker...But have been unsuccessful at getting the solids to come back. Appreciate your help though Kind regards, Shane
  3. I have a reoccurring issue when programming relatively simple solids, they are there up until i re-gen the tool path. It seems to hide all of the solids even ones that do not have tool paths applied to them. Rather confused. Running 2020 as stated in the title and haven't had this issue prior. The tool paths still reference the solids just fine and they show in the solids manager. Any help or hints would be greatly appreciated. Thanks for your time! Shane
  4. If you set the part to horizontal in grain direction and leave all other parts on ignore and tell it the sheet itself is also horizontal. Also you can set the step angle on the part to 180 degrees and it'll remain in the orientation that you drafted it in. Best of luck!

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...