Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

JCo

Members
  • Posts

    4
  • Joined

  • Last visited

Everything posted by JCo

  1. There is an option in solidworks that fixes this issue, we use a lot of parts that have configurations and ran into this problem as well. Go to the configurations tab, right click any configuration and select Add Rebuild on Save Mark. Once that little floppy disk symbol is on every configuration you will never run into this problem again.
  2. FBM drill could get it done. Prodrill would get it done much easier and better. Using none of that and just using model-prep - Hole axis is by far the easiest and cheapest answer. This part is too simple to bother with anything else imo.
  3. Can you upload a sample file?
  4. To import sketches the file needs to be a native .SLDPrt file. When you go to open the file you need to open the options tab. This can also be set in the defaults if you want it on all the time. For this to work you need to at least be at the same version of Solidworks as the file you are bringing in, newer is okay. This will open up a new can of worms with crashing while opening up solidworks files though.. so there is that.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...