thx ernie, i wasnt aware of that

thats correct but all walls .045 chmf and 8.5 draft into center as shown in flat profile thx for your input

Thanks so much for your advice! i did exactly that and it worked like a charm!

CAN SOMEONE PLEASE HELP ME MODELLING THIS DIE? I AM STRUGGLING TO ADD A 45 DEG DRAFT SURFACES TO .04 CUTTING EDGE AND AN 8.5 DEG DRAFT TO .200 EDGE HOW CAN I ACHIEVE THIS? WHAT AM I DOING WRONG? LEVEL 21 FLAT VIEW GIVES YOU AN IDEA I HOPE OF WHAT I MEAN THX IN ADVANCE FOR YOUR HELP help samosa wheel.mcam

Hello less, that is exactly what I’m trying to accomplish! You lost me at create sheet solid, I’m missing something. I understand thicken and Boolean add/ remove. I am. personally struggling with creating the sheet solid. Woukd you you make a video or please explain further? Your help is much appreciated

Hello, i am wondering how is it possible to extrude cut body a font on to a solid sphere so that the font has equal depth. If I project the font onto a solid sphere. It does not let me extrude a non planar chain. So now what? Thanks in advance for all your help

Hi guys, while milling circles for example in surface finish contour my parts are coming out with facets. It happens as well on non circular features. How the heck do I stop this? Thx in advance and I appreciate all the help.

thanks so much for all your input!

nice job pullo!!! thanks so much for all your help!

thank you very much for all your help! one question,how did you greate the upper arc? projection?

Panzarotti Rotary Die.mcam sorry guys,not sure what happened with my previous file I uploaded another so I hope that works this time

Hi, I sorry guys but some of the levels may be turned off. Double check the level manager.

Hello guys, I haven’t finished the model....... that’s why I’m here. Jlw, the geometry was all created by me as per the drawing, not taken from a solid model. there is no solid model available, that’s why I’m making one. The partial model I created was enclosed in the mcam file. 85 people view this and no one can help?? Come on boys, someone must know what’s happening!

Calling all Mastercam modeling wizards. We are new to solid modeling and are struggling to complete this corner on this model. I have extruded the front portion, revolved a portion in the rear and am struggling to sweep the rads and have them join smoothly. Ahhhhhh! If you look from the rear view it appears that my surface actually goes beyond the outside diameter. Some please point me in the right direction. I have enclosed the mcam file and a couple of pics.any help would be GREATLY APPRECIATED! Thanks in advance. NPD-0102 - 4.75in Panzarotti Rotary Die.mcam