Eastern united states

I have never talked with Mazak applications. We always ran Mazatrol and never had a problem. Do you have a phone number for them? I don't see one online. I feel pretty stupid with these questions but I am flying blind into this and there doesn't seem to be much training available for Gcode on a Mazak. Thank you so much for any help.

The G68.2 didn't seem to work at all. I've read other forums that the Matrix 2 control no longer uses the G68.2/G53.1 anymore. I'm not sure. I haven't had time to try the G43. This is a sample post of what we have. Could someone look it over and see if anything jumps out as wrong with it? O7777 (T7 D=2.5 CR=0.12 - FACE MILL) G90 G94 G17 G49 G20 G53 G0 Z0. (FACE 2.52 1ST SIDE) T7 M6 G54 G54.2 P1 X0. Y0. Z0. A0. B-90. C0. S1250 M3 M8 G0 X-0.225 Y2.3532 G43 Z2.225 H7 G0 Z1.825 G1 Z1.7044 F30. Z1.5888 G41 X-0.35 Y0.8532 D7 F65. Y-0.8532 F30. G40 X-0.225 Y-2.3532 F65. G0 Z1.825 Y2.3532 G1 Z1.7074 F30. Z1.5526 G41 X-0.35 Y0.8532 D7 F65. Y-0.8532 F30. G40 X-0.225 Y-2.3532 F65. G0 Z1.825 Y2.3532 G1 Z1.6712 F30. Z1.5164 G41 X-0.35 Y0.8532 D7 F65. Y-0.8532 F30. G40 X-0.225 Y-2.3532 F65. G0 Z1.825 Y2.3532 G1 Z1.635 F30. Z1.4802 G41 X-0.35 Y0.8532 D7 F65. Y-0.8532 F30. G40 X-0.225 Y-2.3532 F65. G0 Z1.825 Y2.3532 G1 Z1.5988 F30. Z1.444 G41 X-0.35 Y0.8532 D7 F65. Y-0.8532 F30. G40 X-0.225 Y-2.3532 F65. G0 Z1.825 Y2.3532 G1 Z1.5626 F30. Z1.4078 G41 X-0.35 Y0.8532 D7 F65. Y-0.8532 F30. G40 X-0.225 Y-2.3532 F65. G0 Z1.825 Y2.3532 G1 Z1.5264 F30. Z1.3716 G41 X-0.35 Y0.8532 D7 F65. Y-0.8532 F30. G40 X-0.225 Y-2.3532 F65. G0 Z1.825 Y2.3532 G1 Z1.4902 F30. Z1.3354 G41 X-0.35 Y0.8532 D7 F65. Y-0.8532 F30. G40 X-0.225 Y-2.3532 F65. G0 Z1.825 Y2.3532 G1 Z1.454 F30. Z1.2992 G41 X-0.35 Y0.8532 D7 F65. Y-0.8532 F30. G40 X-0.225 Y-2.3532 F65. G0 Z1.825 Y2.3532 G1 Z1.4178 F30. Z1.263 G41 X-0.35 Y0.8532 D7 F65. Y-0.8532 F30. G40 X-0.225 Y-2.3532 F65. G0 Z2.225 M5 M9 G53 Z0. M30

Never asked. This was my first place to turn. Everyone here seems to be very knowledgeable.

My shop runs all Mazaks and we have 1 Mazak Variaxis J600. Normally we program it in Mazatrol, but I am trying some software to program it in g-code. The biggest problem is no one in the shop knows g-code. The issue I am asking here is how to use g54.2 to index. The machine is not capable of 5 axis movement but we still can't get it to index correctly. It will index to the correct angle but the tool doesn't track to the correct place. Would anyone be able to help us and guide us through to making good parts?