Miki67
-
Posts
23 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Miki67
-
i tried that already cant have both CALL OO88 or TCP at the same time Thank you
-
when i change the Misc reals to 1 this is what i got do you have same thing between operations if you look at the line G30 P32 That is my home position on machine
-
Correct that is how code should look. I am sending this to my dealer. Thank you for looking into this for me.
-
I forgot to mention that, if you transform only one operation it is ok. but if I transform more then one operation it is not good. sorry about that
-
I tried that already, same thing Thank you.
-
Here is the sample file if somebody wants to look at it note; HAAS 5 axis works fine, it is Okuma that is no working on transform. Haas and Okuma post are from Postability. Thank you. TEST.ZIP
-
i cannot share the file but i will put something together tomorrow. thank you
-
I am wondering if anybody else have this issue. i have 10 slots. i made 1 , and then i transferred the other 9 around the part first slot is ok, when the transform start , that is where I got alarm. I got email from Okuma saying -- cannot use CALL OO88 when tool center point control is active. My question is , is there a switch inside post for this, or do i need to send. this to Postability Any help is appreciated
-
i am not exactly sure what he wants , I think he wants to use Productivity + to probe each point,
-
Productivity + and Mastercam 2022
Miki67 replied to mcpgmr's topic in Machining, Tools, Cutting & Probing
Are you using Productivity + to output to #601 or you wanted to know how to do it -
Your reseller should give you sample impossible to get tcpc why just call haas and they will give you code e mail me at [email protected]
-
you better get tcpc and dwo
-
Good Luck and Best Wishes
-
anybody having this problem "LoadLibrary failed with error 87: The parameter is incorrect."
-
I got this in my misc
-
I have also done some cimco probing , and I am really happy with it so far
-
you can try to get free trail from your reseller
-
anybody using cimco probing any info I would appreciate thank you
-
can anybody share some info on vmc mighty viper 3100 I appreciate any info on it
-
THANK YOU
-
Does anybody has Techniks tool holders lib THANKS
-
Does anybody still have TECHNIKS TOOL HOLDER
-
Check this on YouTube
