R-Miller
-
Posts
19 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by R-Miller
-
I think I found a solution to the program. Somehow the Windows Deafult "shell:desktop" had been changed to my computer cousing the problem. Maby this can help someone else in the future. Cheers!
-
Hi all! I have been using MastercamSimulatorDefaults with modified values regarding tolerances and it has been working fine untill now. The defaults values in Mastercam Simulator is not picking up the values from the MastercamSimulatorDefaults file anymore. Does anyone have had this issue and solved it? Best Regards Rickey
-
Missing End Selection & Clear Selection buttons
R-Miller replied to R-Miller's topic in Industrial Forum
Restarting the program is often the solution for me, now I know the problem is found and fixed! Thanks for a clear answer, my software supplyer did not have an answer to this last time I asked! -
I am experience some issues on my Mastercam 2022, and have done it for some time and now it is becoming a annoying thing. When using some operations when choosing geometry or in the collision control the End Selection & Clear Selection buttons are sometimes missing. Any solutions to the problem besides upgrading to Mastercam 2023? (EDIT: Now with missing image.) Best regards from Sweden.
-
I am Using a Lenovo Thinkpad P17 a year back with the Nvidia Quadro T2000 and 32gb ram and it works great for all my 3d milling operations so far.
-
Might be an off topic but I have / had a problem with the built-in Intel graphics. Disabling it in device manager coursed me problems in windows with lag making the computer unusable. Strange but true. Is there any difference in disable it in bios rather than in windows device manager?
-
Lenovo Thinkpad P17 Mastercam 2022 update 1. i7, 32gb ram, Nvidia Quadro T2000 (0% use of the GPU) - is this normal? 3 min 15 sec.
-
Interesting topic, have been working on Mastercam för 5+ years. Where can i download the benchmark file and how does it work? It would be fun to run it on my collueges 7 year old computers anc compare it to my new one.
-
Anyone using the Nvidia Quadro P620 card running Mastercam? Looking for information compared to the Quadro T2000 model.
-
Sounds good! We are actually looking at this machine as a replacement to our large old gaming computers from 2013 with i7, 16GB, 256GB SSD, GeForce 780Ti. Let's hope the performance will be as good as I hope for! =)
-
This actually help quite a bit! Some training to it and I think I can make the changes. Still think our way to work should be with surfaces instead of solids. Much more simple in our daily work with many minor changes from customer.
-
That is what I'm trying to achieve in my work-group!
-
I can't find any newer treads of this so I post a now one. I have a many operations program based on a solid part, some help-lines and help-surfaces. I want to update the solid part with minor changes on it. Is it possible to swap the solid part in some way and maintain the operations associated to the non changed parts. Lets say the change only is a small pocket in a advance geometry. Cheers!
-
Merge part-files with Geometry + Toolpaths?
R-Miller replied to R-Miller's topic in Industrial Forum
Thanks for well written instructions but this did unfortunately not work. As you mentioned in the notes probably coursed by tool-planes and 5-ax operations. "Warning - MultiAxis operations are not supported" -
Merge part-files with Geometry + Toolpaths?
R-Miller replied to R-Miller's topic in Industrial Forum
I've tried to import / merge each file but Mastercam and importing toolpaths frome files including geometry but getting error "solid geometry from external file is not accessible" Operations witch uses lines works after regeneration, but toolpaths connected to solids/surfaces are missing the geometry to work. Please tell me more how to use "nesting to import the operations". -
Merge part-files with Geometry + Toolpaths?
R-Miller replied to R-Miller's topic in Industrial Forum
Backup is unfortunately not an option due several changes have been made to the part-programs. -
I have multiply part files in my folder. They have been one part-file from the beginning with groups "program1, program2, program3..." Someone in my team did not like this and split the file into 15 part files. My question is: Is it possible to merge this part files into one file again? I have tried merging the files but only get the geometry added. Merging or importing the toolpath seems to be not easy.
-
I had the same issue on my Surface Pro 4, I solved it by starting the "Mastercam Advanced Configuration", go to Graphics support and try disabeling Hardware acceleration. It worked for my but somehow it draws toolpaths incredible slow...
-
Hi! Any solution on this drilling issue? I'm alsow working in plastic and vacuum and would like the drills to retract in the same speed as when drilling. Rapid retract sometimes lifts the material from the vacuum-table.
