@Jake LDid you guys end up going with a system? If so, which one do they go with?

Hi AZGabesz, Would you be able to send me a email with a Mastercam Z2G along with your contact & company information? We can then look into this for you! My email is [email protected]

CIMCO DNC Max can certainly handle this and has built in drivers for the Moxa units (wired or wireless). Nothing is reliable as a wired connection IMO but definitely depends on a few factors. The Wireless converter boxes are about double the price of the ethernet to RS-232 converter boxes and the wireless ones are getting a bit hard to find in Moxa brand because of the chip shortage and end of life of a particular part. In either situation, you only have a 3ft - ~ 10ft cable that would be transferring RS-232 code format vs the rest is done via ethernet so typically the baud rates can be upped a bit

Hi Tegheim83, I have sent you a DM & email a few weeks ago regarding this but havnt heard anything back yet. If you are still having troubles or need anything from us, please feel free to reach out as we will be happy to help! [email protected]

Hi Tegheim83, I sent you a DM - If you could take a look at that and send me over a Mastercam Z2G & the probe data log files under C:\Users\<USERNAME>\AppData\Local\Temp\CIMCO Probing that would be great. Thank you!

Tegheim, are you still running into issues with CIMCO Probing and it crashing your system? When opening up your file I see that it shows up as 0.0K for the toolpath size and wont let me open the operation. If you are still having issues, please try downloading the latest version ( https://mastercam.dk/getprobing ) and email me if you are still having issues. [email protected]

I would agree with gms1 - The Doosans are generally setup with M165 vs G65. Here is a picture from a Doosan Manual that uses the M165 for the 9810 (Protected Positioning cycles)

@Rstweart - The Renishaw Macros will have the G103P1 inside of the macro as you can see in my screenshot. With this being the case, whenever CIMCO Probing calls up that macro, it right away limit the look ahead and would be redundant in my opinion. Here are two examples - one is in the 9810 (Protected positioning moves) & a standard measurement cycle such as 9814 (Bore/Boss cycle). Hope this helps!

Hi bd41612, My name is Ryan Mermall, and am the CIMCO Probing product manager here in the states. Can you please send me a email so we can get you set up with a trial? [email protected]