I called the reseller, lest see how far I get? Although I only have until August 17th and I retire, I would still like to learn more. I have the post backed up through every change, so I can trace it back if I have to. Ever since reading the Gold Bug by A. E. Poe I have been interested in code and this is like trying to break one. I know how to use if and go to, etc in G code with no problem. I have done some parametric coding on machines, but I think without a bit of help I may have reached my limit here . I thank you for all you have done so far. There are just a few things I would like to straighten out before I leave. My next endeavor will be multiple parts with different offsets. I have the post now where it will call subs with M97 instead of M98 and name the subs beginning with an N instead of an O, but there are some other problems to iron out that I am working on. They might just go with another post when I leave but my coworkers are used to seeing and working with the programs in their present format so I would like to get it ironed out before I leave. Thank You Jerry

Stupid question #2 "I would recommend that you get the MP documentation from your reseller. " Does MP stand for mastercam post processor and if not what does it stand for. ? The reason I ask is when I call them I don't want to sound as ignorant as I do here. I know how to run the debugger and use it to an extent or I would not have gotten as far as I have. I have the debugger guide I have a post processor guide which I have used or I wouldn't have gotten as far as I have. These seem to be written for someone who is already familiar with the language and how it works I have searched all over the net and have not found much. It is like trying to teach someone music theory who has very little knowledge of music. It seems nothing starts from scratch.

It posts clean, I have been using it for years. Anywhere you see JD is where I made a change. here is a typical program it produces. I don't like block numbers cluttering up the program and I can find my way around easily without them. Does it post clean? Or do you get the "Do you want to see your errors" message when posting. If I see that alarm I go right back to the previous version. I know how to use some of the debugger, my main problem is I don't know any computer languages. That is why I posted, I don't know the language but I have been able to do a lot of massaging of the post processor through educated guesses and trial and error. By trial and error I mean, make a change, document, post, check results, then either keep the post or go back to the previous version. I have been working in machine shops since 1969. % O8595( 661-20-00-0859 R01 OP5 ) ( 06-04-17 TIME=HH:MM - 14:47 ) ( N10 T28 | LONG 3/8 3FLT CEM | ) ( N20 T29 | 8 INCH LONG 3/8 DRILL | ) ( N30 T30 | 3/8 DRILL X 18 INCH LONG | ) ( N40 T31 | 6 INCH #4 CENTER DRILL | ) ( N50 T32 | 3/16 LONG DRILL | ) G20 G0 G17 G40 G49 G80 G90 N10 T28 M6 ( LONG 3/8 3FLT CEM | TOOL - 25 | ) G0 G90 G58 X-1. Y-1.125 S1850 M3 G43 H28 Z.1 T26 M8 G98 G83 Z-3.625 R-3.3 Q.03 F3.5 X1. G80 M5 M9 G91 G28 Z0. G90 M01 N20 T29 M6 ( 8 INCH LONG 3/8 DRILL | TOOL - 26 | ) G0 G90 G58 X1. Y-1.125 S1800 M3 G43 H29 Z.1 T27 M8 G98 G83 Z-5. R-3.4 Q.1 F6. X-1. G80 M5 M9 G91 G28 Z0. G90 M01 N30 T30 M6 ( 3/8 DRILL X 18 INCH LONG | TOOL - 27 | ) G0 G90 G58 X1. Y-1.125 S1800 M3 G43 H30 Z.1 T28 M8 G98 G83 Z-13.113 R-3.4 Q.06 F6. X-1. G80 M5 M9 G91 G28 Z0. G90 M01 N40 T31 M6 ( 6 INCH #4 CENTER DRILL | TOOL - 28 | ) G0 G90 G58 X0. Y-1.3438 S1250 M3 G43 H31 Z-3.4 T29 M8 G99 G81 Z-3.812 R-3.4 F2.5 G80 M5 M9 G91 G28 Z0. G90 M01 N50 T32 M6 ( 3/16 LONG DRILL | TOOL - 29 | ) G0 G90 G58 X0. Y-1.3438 S2000 M3 G43 H32 Z.1 T25 M8 G98 G83 Z-7.06 R-3.4 Q.06 F6. G80 M5 M9 G91 G28 Z0. G0 G90 G53 Y0. M30

this is the original section from the above example var1 = 10#JD variable for toolchange block number pcom_moveb pcheckaxis c_mmlt$ #Multiple tool subprogram call #ptoolcomment-suppresed so tool comment comes up on same line as tool change not before JD 5/20/2016 comment$ pcan pbld, n$, *var1, *t$, sm06, ptoolcomment e$#add var1 for toolchange block number and tool comment JD pindex if mi1$ > one, absinc$ = zero pcan1, pbld, n$, *sgcode, *sgabsinc, pwcs, pfxout, pfyout, pfcout, speed, *spindle, pgear, strcantext, e$ pbld, n$, sg43, *tlngno$, pfzout, pstagetool, e$ pbld, n$, scoolant, e$ absinc$ = sav_absinc pbld, n$, sgabsinc, e$ pcom_movea toolchng = zero c_msng$ #Single tool subprogram call

the machine definition and x coolant are set up correctly, I think you may miss what I am aiming for. here is how it spits it out G0 G90 G54 X1. Y1. S1000 M3 G43 H1 Z1. M8 OR M88 If programmed for M08 that is fine this is what I want it to look like if programmed for M88 G0 G90 G54 X1. Y1. G43 H1 Z1. M88 S1000 M3 I want the spindle to turn on after the coolant comes on, the spindle turns on first whether I have the coolant set for with or after. I don't to want use before because then the coolant turns on while the spindle is at machine zero and if the door is open you are soaked and you also cannot see the tool as it approaches the part. The other problem is when using coolant through we are usually doing around ten grand or better in the rpm and the spindle has to stop and brake, then the coolant comes on, and then the spindle revs back up again, causing unnecessary wear and tear on the spindle. At thew end of the tool cycle the post would turn off the coolant then shut the spindle off. When using M88 the spindle would have to brake, shut off, then turn back on, then read the M5 and shut off again. I was able to massage to reverse that and fix it but I have not been able to do it to the beginning of the tool cycle. Thank YOu Jerry

I should say hello and it is my first time here. I won't be around too long. I just retired and plan on working for another 4 to 6 months and then leaving the trade. I have been doing this since I was 17 and it is now time to take it easy and try something different, but I am going to give this post one last going over before I call it quits and get it where I want it. This is if a Haas 2 axis mill My objective here is to have my spindle turn on before the coolant comes on, but I want the coolant to come on before the spindle turns on when the command is an M88 for coolant through. I don't know the language but I have been able to do a lot of massaging of the post processor through educated guesses and trial and error. or flood coolant this is what I am putting out now O3521( 121-55-50-9352 R00 ) ( DATE - JAN. 28 2019 - 14:55) ( N10 T1 | 3/8 SPOTDRILL | ) G20 G0 G17 G40 G49 G80 G90 N10 T1 M6 ( 3/8 SPOTDRILL | TOOL - 1 | ) G0 G90 G54 X-13. Y0. S5000 M3 G43 H1 Z1. M8 Z.1 For coolant through this is what I am putting out now O3521( 121-55-50-9352 R00 ) ( DATE - JAN. 28 2019 - 14:55) ( N10 T1 | 3/8 SPOTDRILL | ) G20 G0 G17 G40 G49 G80 G90 N10 T1 M6 ( 3/8 SPOTDRILL | TOOL - 1 | ) G0 G90 G54 X-13. Y0. S5000 M3 G43 H1 Z1. M88 Z.1 For coolant through this is what I want, the spindle to turn on after the coolant. O3521( 121-55-50-9352 R00 ) ( DATE - JAN. 28 2019 - 14:55) ( N10 T1 | 3/8 SPOTDRILL | ) G20 G0 G17 G40 G49 G80 G90 N10 T1 M6 ( 3/8 SPOTDRILL | TOOL - 1 | ) G0 G90 G54 X-13. Y0. G43 H1 Z1. M88 S5000 M3 Z.1 MC 2017, I have tried working with scool54, either I am not formatting properly or I am putting it in the wrong place etc. If you look at the code below and see where I typed my changes start here and changes end, that is the section I am changing psof$ #Start of file for non-zero tool number prv_tloffno$ = c9k pcuttype toolchng = one if ntools$ = one, [ #skip single tool outputs, stagetool must be on stagetool = m_one !next_tool$ ] pbld, n$, *smetric, "M31" e$ #Added M31 to turn conveyor on. pbld, n$, *sgcode, *sgplane, scc0, sg49, sg80, *sgabsinc, e$ sav_absinc = absinc$ if mi1$ <= one, #G92 Local Work coordinate system [ absinc$ = one pfbld, n$, sgabsinc, *sg28ref, "Z0.", e$ pfbld, n$, *sg28ref, "X0.", "Y0.", e$ pfbld, n$, sg92, *xh$, *yh$, *zh$, e$ absinc$ = sav_absinc ] if mi1$ = three | mi1$ = four, #G52 Work Shift [ absinc$ = one pfbld, n$, sgabsinc, *sg28ref, "Z0.", e$ pbld, n$, sg52, *xh$, *yh$, *zh$, e$ if xh$ | yh$ | zh$, shft_flg = one else, shft_flg = zero absinc$ = sav_absinc ] MY CHANGES START HERE if scool54, [ var1 = 10#JD variable for toolchange block number pcom_moveb pcheckaxis c_mmlt$ #Multiple tool subprogram call #ptoolcomment-suppresed so tool comment comes up on same line as tool change not before JD 5/20/2016 comment$ pcan pbld, n$, *var1, *t$, sm06, ptoolcomment e$#add var1 for toolchange block number and tool comment JD 5/20/2016 pindex if mi1$ > one, absinc$ = zero pcan1, pbld, n$, *sgcode, *sgabsinc, pwcs, pfxout, pfyout, pfcout,e$ pbld, n$, sg43, *tlngno$, pfzout, pstagetool, e$ pbld, n$, scoolant, e$ pbld, n$ *speed, *spindle, pgear, strcantext, e$ absinc$ = sav_absinc pbld, n$, sgabsinc, e$ pcom_movea toolchng = zero c_msng$] #Single tool subprogram call else, [ var1 = 10#JD variable for toolchange block number pcom_moveb pcheckaxis c_mmlt$ #Multiple tool subprogram call #ptoolcomment-suppresed so tool comment comes up on same line as tool change not before JD 5/20/2016 comment$ pcan pbld, n$, *var1, *t$, sm06, ptoolcomment e$#add var1 for toolchange block number and tool comment JD 5/20/2016 pindex if mi1$ > one, absinc$ = zero pcan1, pbld, n$, *sgcode, *sgabsinc, pwcs, pfxout, pfyout, pfcout, *speed, *spindle, pgear, strcantext, e$ pbld, n$, sg43, *tlngno$, pfzout, pstagetool, e$ pbld, n$, scoolant, e$ absinc$ = sav_absinc pbld, n$, sgabsinc, e$ pcom_movea toolchng = zero c_msng$] #Single tool subprogram call CHANGES END HERE and the rest is next in the post ptlchg0$ #Call from NCI null tool change (tool number repeats) pcuttype toolchng0 = one pcom_moveb pcheckaxis !op_id$ c_mmlt$ #Multiple tool subprogram call comment$ pcan pbld, n$, sgplane, e$ pspindchng pbld, n$, scoolant, e$ if mi1$ = three | mi1$ = four, #Work coordinate shift [ #pbld, n$, *sg28ref, "X0.", "Y0.", e$ pbld, n$, sg52, *xh$, *yh$, *zh$, e$ if xh$ | yh$ | zh$, shft_flg = one else, shft_flg = zero ] if mi1$ > one & workofs$ <> prv_workofs$, [ sav_absinc = absinc$ absinc$ = zero pbld, n$, sgabsinc, pwcs, e$# pfxout, pfyout, pfzout, pfcout, e$#removed sgabsinc pfxout pfyout pfzout(CHANGED 3-7-2015 JD-HAD ASTERIK IN FRONT) pbld, n$, pwcs, e$ pe_inc_calc ps_inc_calc absinc$ = sav_absinc ] if cuttype = zero, ppos_cax_lin if gcode$ = one, plinout else, prapidout#/ put asterik in front to prevent axix movement after WCS callout in multipart program/axis movement now in subs pcom_movea toolchng0 = zero c_msng$ #Single tool subprogram call Any help will be greatly appreciated. I have some other issues, but, one at a time. Thank You Jerry