tazbierek
-
Posts
58 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by tazbierek
-
Hi. Any tips for stainless 304 face milling ? I'm using 5 inch face mill with 9 inserts. Any tips how rpm. How deep and feed I should use ? Also coolant or without? Thank you. It's. 250 radius inserts
-
Its casting,But thats true no sense joining them, Thank you again
-
Ok guys i think i did it. i simply draw rectangle at the pocket and select it s a contour. idk if i have to did that but it works so it works
-
this is real part, I have it on rotate table. first setup i will do bores, thenrotate 90 degree and do that part.the thing is i have to do thin on this setup so XYZ have to be as shown , I know i can be frustrating for u guys, but i have to say again i do that part on fusion 360 and it was peace of cake. but here i have like tons of questions. Sorry for that and english again and hope for your help
-
My next problem is with selecting contour, I tried to draw a rectangle but always making a bad selecting. I need to cut this firs pocket using contour , after that i need using slot mil, but my problem is with selecting the geometry, how is the good way to do that ?
-
Yes but i see then i have same problem on top of cutting or mby i just doing something bad
-
Hi! I need to define multiple depth for that model so the second bore not gonna be cutting as deep as u see .Is it possible?
-
I have to say that I even not speak english well, i came to USA for work i found a shop and start learning everything. Its hard but i want to learn and im happy when i solving new prolems. Im really glad that i found that forum and U help me because u dont have to do that, Probably most of U paid for that informations, for your knowalge, u use uyour time and money and u doint that for free, i hope one day i will be able to help you guys!
-
Yeah I know but I tried to draw it with but results
-
Hi Guys its again me, i have a little project. I draw it in Fusion 360 which take me around mby 10 minutes. Im trying to do that in mastercam and u know it take me now like 3 hours and i even didnt start Its really really hard for me, I know its too much but mby there is someone who can draw it for me in video ? I dont need the finish project but tutorial how to do that because in mastercam im lost right now I Hope u will help me. Thanks in advance
-
It can be any finish model. i just cant see where i can set lea in and out in finish parallel. Can u explain me where?
-
Ok now i have this I set Containment, so now i understand that offset tool which is not bad in my opinion, Still dont know how to set lead in and lead out, startting point looks like doesnt work
-
Hi guys, i need to use paralelle on this project It looks ok but i need to put start point away from my solid, also i needput some additional offset from center of my tool , but whatever i use ( inside outside or center) the results are the same as shown on screen, can u help me ? And hope u know what i mean i see that There is (o) in conpeinment . Also i need to change lead in and lead out for the material / I see no option in surface finish parallel.
-
Hmm okay. Anyway have to use it as cad too so I need to try
-
Ok so i tried several options and, I select enteties, and usin dynamic transform, puting gnom in center of enteties, transform to midpoint nex enteties and after that puting values to set distance from that enteties, i dont know if its the simplest way but it works . But i have to say if its the best way then its a waaaaaaaay worse than in fusion where i can select enteties put d(dimension) and simply select enteties which i want and put values,. BTW Sorry for english, learning same as mastercam
-
Thanks again guys . My first project is done. Simply but it is.
-
Ok its not bad now. Mby its just me thinking that in fusion is way better. Thank You sir
-
Hi all, one quick question I want to put some points how to define xy position like here ? I need to put some dimensions between point and that enteties There is no option dimension between that enteties and point? is it really hard to do that? I dont want to put position from origin because i need to calculate it, and i can just delete mastercam and use calculator. also i dont like if i have to need create new origin or plane, because i will lost with that, there will be so many other origins then which i dont like i just want simply dimensions.
-
Hey man did u find solution for drip feed with that machine ? I have same problem
-
I can't see. I spend on it many hours and nope. Mby its just me can't see that . We have more machines and they have tape mode and its easy but no that one but I need it. I can't see remote
-
There is no tape mode thats the problem I know but I don't know which parameters should I change . I hope there is someone to help me
-
here is rsst of photos . As I said there is connection cause I can semd it to my machine but for memory I have to click punch on my machine but I need to run it from dnc because of low memory
-
HELLO everyone. I need help to configure my dnc and parameters on my machine . I dont have tape mode on my machine so its hard. I can send it to my machine and from machine to dnc but I have no much space for programs and o need to run it automatically from my DNC with USB port. Can anyone tell my how ? I'm using rs232 port which looks like that one . And here u can see my dnc and my control panel
-
I want create new level so i type 10: and letters andhere is my problem, by typing New in E letter i have extruding shortcut and its turning it on so i can normal type, i can do that in menager bar but can do that in organize . any idea ?
-
Ok i got it
