Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

MACHINIST1695

Members
  • Posts

    4
  • Joined

  • Last visited

Everything posted by MACHINIST1695

  1. Ive tried the flowline with no success either, also adjusted my z levels when trying to use the finish parallel toolpath. Not sure if I have bad data or if it's just my lack of exp. I uploaded a picture of how the flowline is looking for me, also attached a file. IV BLOCK FL.mcx-9
  2. Will do, still new to the 3D Toolpaths. Trying my best to teach myself and make it happen the best I can. thank you!
  3. Unsure of where I am wrong here, I cant get the toolpath to follow the boundary,the radius is .0787, I selected a .125 ballnose, now it is acting as if the cutter is too big. New to 3D toolpaths so any help is appreciated! Mastercam file attached Thank You BLOCK.mcx-9
  4. Not really sure what to ask but Is there a way to rotate the model to the 32.5 degrees? I have to mill a slot on a 32.5 degree angle, and need to orientate the model before choosing a new WCS, when I go to rotate it only wants to rotate off the X axis.. using a 3 axis haas mill running mastercam x9. Still fairly green to programming and have been teaching myself off videos< and the forum. thanks WELP NEVER MIND. IM A DUMMY. I FIGURED IT OUT. THANK YOU.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...