Good morning, sorry for my English, I think I do not ask the question well, I need to extract the operation of the tool from the MCX file and insert it into the ISO program as well as the Operation number of the MCX file. I hope you help me, I am reading a lot in this forum and you do a great job, thank you very much and happy day

Good morning, the comments are activated I would like to generate what each operation will do so that the operator knows what each operation is and what it is for, its going to drill, plan, pocket ... thanks

Thank you very much for the help, what I want is to post-insert the corresponding operation and what you will do, to plan, drill, cashier ... etc and to list me, I am using mastercam 2018 and wanted to do it to facilitate the work on the machine. N2 (..... OPERATION ......) (Operation 2 - CONTOUR) (Tool: T1 - END MILL) (................................)

Good morning, sorry for my English, I am new to the forum, I need help to modify postprocessor 3 axes, I wanted to put operational comments in the ISO program, I give an example: % O1234 (EXAMPLE) G00 G91 G28 Z0. N1 (..... OPERATION ......) (operation 1 - PLANNED) (Tool: T1 - ENDMILL) (................................) T1 M06 (ENDMILL) S10000 M03 G00 G90 G54 X-65. Y26.998 S10000 M03 G43 H1 Z5. M08 T1 Z2 G01 Z.5 F4000. X59 G00 Z5. G49 M01 N2 (..... OPERATION ......) (Operation 2 - CONTOUR) (Tool: T1 - END MILL) (................................) S10000 M03 G00 G90 G54 X5.657 Y70.707 S10000 M03 G43 H1 Z5. M08 Z.5 G01 Z-3.6 F4000. G41 D1 X-9.899 Y55.151 G03 X0. Y51.05 I9.899 J9.899 G01 X28.65 G02 X51.05 Y28.65 I0. J-22.4 G01 Y-28.65 G02 X28.65 Y-51.05 I-22.4 J0. G01 X-28.65 G02 X-51.05 Y-28.65 I0. J22.4 G01 Y28.65 G02 X-28.65 Y51.05 I22.4 J0. G01 X0. X1 G03 X10.899 Y55.151 I0. J14. G01 G40 X-4,657 Y70,707 G00 Z5. M5 G49 M09 G00 G91 G28 Z0. G00 G91 G28 Y0 M30 % All help in welcome, thank you very much and have a nice day