Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

PetePO

Members
  • Posts

    2
  • Joined

  • Last visited

Everything posted by PetePO

  1. Hello Recently i've running long program containing almost only 3d waterlines on fadal . In my mastercam visualization there were no miastakes , normal 3d paths . In discriminator also everything was good. When i run it on fadal in the middle of path the mill suddenly went from 3d waterline to contouring some large cricle then went back to 3d path. My stepdown was 0.1 mm. Tolerance of path set to 0.025. What can cause these type of problem ?
  2. Hello, I have a problem with creating toolpath for 4th axis containing helix bore. Here is the part. First I need to drill all the holes then to make them bigger i wanted to use helix bore with end mill. With drilling there is no problem(using drill option from multiaxis tab) but when I try to use helix bore there is no way to select good entities. Because this solid is empty inside there is no 2d wireframe of arcs . I tried roll with no success, it generated only splines, same with silhouette boundary. Is there any way to do it with 2d helix bore?

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...