3DGee
-
Posts
16 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by 3DGee
-
When I select all my operations and post my program in mastercam 18 it only posts 1 tool path at a time I don’t know what’s wrong I’m sure it’s something simple . Any help ? Thanks
-
I am Trying to create a custom tool , it’s a double angle chamfer tool and I keep getting this message . Problem with custom geometry file or data . Check for gaps , overlaps , or blanked / hidden entities . I’ve done everything it says and I just can’t get it to work . Any advise helps . Thanks .
-
YUP , I FOUND OUT TODAY THAT OUR MACHINE DOES NOT SUPPORT DYNAMIC FIXTURE OFFSETS ... SUCKS!
-
Do you know if this is activated using a m code? or is it a setting in the machine paramaters ? thanks for the reply .
-
hey guys i was wondering if i could get a little help . i am using a brother S1000 its a 3+2 and i have been programming it from center line of rotation but i recently saw a haas video on youtube showing you how to use dynamic work offsets using g54.1 i have been looking around online to see if that works with fanuc controls or if its only a haas thing. the video seemed pretty cool and im newer to programming 5 axis and i wanted to know if anyone knew if this worked with my control and or machine . thanks!
-
I went with a laptop because I program at work and home for other shops . I agree a desktop would be the way to go . The laptop was $3,600 .
-
I kept hearing that Nvidia quadro was the the way to go and I’m sure it works good but it’s very pricey . I ended up going with a AMD Radeon 7130WX 8gb for my graphics card , windows 10 pro 64bit , 32 gb of RAM , Intel Xeon 8 core processor 3.2 ghz with a turbo boost 5ghz . I put all this in a Dell 7740 precision laptop . It works very well with mastercam and solid works . I hope this was helpful to anyone trying to figure out what to buy . You can put your own laptop together on www.dell.com .
-
I wanted to start a topic on computer specs and people’s set ups that run mastercam and how they work for them . I had a lot of questions when I was building my laptop and I’m sure a lot of people do .
-
Mastercam 2018 optirough stock to leave ??
3DGee replied to 3DGee's topic in Machining, Tools, Cutting & Probing
There it is . Hahaha I knew it was right in front of my face . Thank you very much . I’ve been looking for that for a while . -
Hi I’m trying to learn Mastercam 2018 and I am trying optirough and I don’t see where stock to leave is . I’m sure it’s in there I just don’t see it Any help would be highly appreciated . Thanks .
-
I just got a dell precision 7740 32gb of ram, with a radeon pro wx 8gb , intel xeon . it works great . you can build one on dell.com
-
I need a post for our makino , if anyone had one it would be highly appreciated .
-
Mastercam not working unless it has an internet connection
3DGee replied to 3DGee's topic in Industrial Forum
Thanks -
Does anyone know why mastercam wont work unless it has a good internet connection? if i dont have a connection it works for about 5 minuets and then freezes . Thanks.
-
Hi did you ever find out what the problem was with mastercam not running unless there was an internet connection? im having the same issue.
-
I’ve been having the same exact problem with mastercam . It runs for a few minuets and then freezes . Has anyone found the solution? So far I’ve tried to turn off automatic updates and feedback . Neither have worked . Thanks .
