Search the Community
Showing results for tags 'mastercam'.
-
-Setup Sheet (CaliberMill-File).zipI am looking for a little bit of help in regards to active reports. We use Mastercam 2017 here and Active Reports Designer to customize setup sheets. I have customized a setup sheet for our shop but can’t get things working quite right. My goal was to attach the tool list to the setup sheet. It seemed like it worked but when I do a preview of the base setup sheet, it doesn’t seem right because it doesn’t put some tools in the list. If I preview the -SetupSheet (CaliberMill-File), I get some tool numbers in the list, so I take it that means it isn’t picking up the information. Is there anyone that can help me with this? It seems like something very small. Thanks.
-
1,416 downloads
These files are intended for those who have purchased the Mastercam X7 Handbook Volume 3, available here. Files included: 5X_TEST_PIVOT LOCATION.MCX-7 AEROSPACE.MCX-7 AIRFOIL FLOW 5 AXIS.MCX-7 ANGLE RANGE.MCX-7 AREA TYPE.MCX-7 CAMSHAFT.MCX-7 COLLISION CONTROL SET TO TILTING TOOL AWAY WITH MAX ANGLE.MCX-7 CONVERT TO 5 AXIS.MCX-7 CURVE 5 AXIS CURVE TYPE 3D CURVES.MCX-7 CURVE 5 AXIS TOOL AXIS CONTROL CHAINS.MCX-7 CURVE 5 AXIS TOOL AXIS CONTROL FROM POINT.MCX-7 CURVE 5 AXIS TOOL AXIS CONTROL LINES.MCX-7 CURVE 5 AXIS TOOL AXIS CONTROL PLANE.MCX-7 CURVE 5 AXIS TOOL AXIS CONTROL TO POINT.MCX-7 CURVE 5AX SURFACE EDGE ONE MULTIPLE SURFACES2.MCX-7 CURVE PROJECT NORMAL_PLANE.MCX-7 CURVE PROJECT NORMAL_SURFACE.MCX-7 CURVE TYPE SURFACE EDGE ALL.MCX-7 CURVE TYPE SURFACE EDGE ALL-WITH SEAM.MCX-7 CURVE TYPE SURFACE EDGE ONE.MCX-7 CURVE5AX TOOL AXIS CONTROL SURFACE.MCX-7 CURVE5AX_SPLIT TRIMMED SURFACE.MCX-7 CUT PATTERN BOX.MCX-7 CUT PATTERN CYLNDER.MCX-7 CUT PATTERN SPHERE.MCX-7 CUT PATTERN SURFACE.MCX-7 CUT TOLERANCE.MCX-7 CUTS ALONG CURVE.MCX-7 DRILL 5 AXIS EXAMPLE.MCX-7 DRILL ENTITY TYPE POINTS_LINES.MCX-7 DRILL OUTPUT FORMA.MCX-7 DRILL OUTPUT FORMAT.MCX-7 DRILL TIP CONTROL ORIGINAL POINT.MCX-7 DRILL TIP CONTROL PROJECTED POINT.MCX-7 DRILL TOOL AXIS CONTROL PLANE.MCX-7 ENTRY EXIT.MCX-7 FILTER.MCX-7 FLOW TOOL AXIS CONTROL BOUNDARY.MCX-7 FLOW TOOL AXIS CONTROL CHAIN.MCX-7 FLOW TOOL AXIS CONTROL LINES.MCX-7 FLOW TOOL AXIS CONTROL SURFACE.MCX-7 FLOW TOOL AXIS CONTROL TO AND FROM POINTS.MCX-7 FROM START TO END.MCX-7 GAP SETTINGS.MCX-7 GRADUAL ANGLE CHANGE.MCX-7 IMPELLER.MCX-7 IMPELLER.STL IMPELLER_2.MCX-7 LASER TRIM CUT.MCX-7 LIMITS.MCX-7 MACHINE BY LANES_REGIONS.MCX-7 MAXIMUM ANGLE STEP.MCX-7 MESH TOOLPATHS.MCX-7 MOPH BETWEEN 2 CURVE PATTERN.MCX-7 MORPH BETWEEN 2 SURFACE GEOMETRY SELECTION.MCX-7 MORPH BETWEEN 2 SURFACE PENCIL.MCX-7 MORPH BETWEEN TWO SURFACES.MCX-7 MOVE TOOL AWAY.MCX-7 MSURF CUT PATTERN SURFACE.MCX-7 OUTPUT FORMAT.MCX-7 PARALLE CUTS.MCX-7 PARALLEL TO SURFACE.MCX-7 PORT ADD EXIT BLEND.MCX-7 PORT MACHINING.MCX-7 PORT TOOL AXIS CONTROL_CHAIN GEOMETRY.MCX-7 PORT WITH CURVE.MCX-7 PORT.MCX-7 PROJECT CURVES.MCX-7 PROJECT CURVES_TOOLPATH.MCX-7 RIB CUT.MCX-7 RIB CUT.X_T ROTARY 4 AXIS AXIAL CUT.MCX-7 ROTARY 4 AXIS AXIAL DAMPENING LENGTH.MCX-7 ROTARY 4 AXIS NORMAL TO SURFACE.MCX-7 ROTARY 4 AXS THROUGH A POINT.MCX-7 RUN TOOL.MCX-7 SIDE TILT DEFINITIONS.MCX-7 SWARF 4-AXIS.MCX-7 SWARF 5 AXIS WALLS CHAINS.MCX-7 SWARF 5-AXIS_RAILS-AEROSPACE PART.MCX-7 SWARF OUTPUT FORMAT 4 AXIS HORIZONTAL.MCX-7 SWARF OUTPUT FORMAT 5AXIS.MCX-7 SWARF TIP CONTROL LOWER RAIL.MCX-7 TILTED FROM CURVE.MCX-7 TILTED THROUGH CURVE.MCX-7 TILTED THROUGH LINES.MCX-7 TILTING STRATEGIES POINT.MCX-7 TILTING STRATEGIES.MCX-7 TOOL AXIS CONTROL -RELITIVE TO DIRECTION-1 LINE.MCX-7 TOOL AXIS CONTROL SURFACE.MCX-7 TOOL BOX BLADE ROOT MACHINING.MCX-7 TOOL BOX CAVITY TILT CURVE.MCX-7 TOOL BOX ELECTRODE.MCX-7 TOOL BOX IMPELLER BLADE.MCX-7 TOOL BOX IMPELLER FLOOR.MCX-7 TOOL BOX PORT EXPERT.MCX-7 TOOL BOX PROJECTION.MCX-7 TOOL BOX SWARF MILLING.MCX-7 TRIM_EXTEND OPTIONS.MCX-7 TURBINE BLADE.MCX-7 TURBO_IMPELLER.MCX-7 TUTORIAL 5 COLLISION CONTROL STRATEGIES.MCX-7 Z AXIS LIMITS.MCX-7Free -
Amidst all the odd changes and Mastercam's idea to take simplicity away in 2017...How on gods green earth do you change levels?! I can't figure out how to move geometry to another level; the ease of being able to "right click" in the levels box for the entire X series and even back into the V series and having the change level box pop up was beyond convenient. Does it still exist?
-
Hi there Everyone, I'm from Portugal and I've been working and learning Mastercam for a few months in the company where i work, we have a CNC router with Fanuc Controller and everything works has it should. A couple of months ago a friend of mine asked me to help him programming a wood CNC, a Morbidelli Author xxxxx (I don´t know the model exactly) and i just can't get the thing running. The machine has a USB port to import the files that are created externally. I need some help to get the thing right, can you please tell me how do i import the g code from Mastercam to the machine? Your help would be very appreciated. Thanks in advance.
-
Hi All i'm new to MasterCAM and i created a piece in AutoCAD (a lot of stuffing around), but i brought into MasterCAM and set out all the tool paths and everything, and generated the g code, but... The problem it that i have the Z axis starts at 30mm instead of 0 in the Gcode and this is screwing up my CNC because it isn't built to lift up by 30mm on the Z axis., and the only way i can imagine to make it work is by going through the g code and changing every "30" value to 0 and every "29" Value to -1 and so on, how can i fix thins pre Gcode in MasterCAM. and secondly i am milling tapered holes two main ones of different sizes and one of the holes will not mill all the way through on the simulated mill, which i also don't know how to fix, i am getting a little frustrated, and all the help i can get would be greatly appreciated Regards Symon Ps the file i am using is attached below carby plate 1.mcx-8
-
Version 1.0
The Mastercam X9 Instructor Kit for Mill & Lathe is the ultimate toolkit for instructors looking to enhance their 2D mill, 3D mill and lathe classes while minimizing prep time The Instructor Kit for Mill & Lathe offers an array of tools to make Mastercam easier than ever to understand. This package includes: Mastercam X9 Mill Essentials Instructor Guide Mastercam X9 Mill Essentials Training Tutorial Mastercam X9 Mill Advanced Instructor Guide Mastercam X9 Mill Advanced Training Tutorial Mastercam X9 Mill Lathe Instructor Guide Mastercam X9 Mill Lathe Training Tutorial Mastercam X9 Home Learning Edition / Demo Software- pending release from CNC Software Practice Exercise, Quizzes, Mid-Term and Final Exam Tests Completed parts (.MCX-9) for verification purposes Instructor PowerPoint® presentations Note: Files included on the instructor resource CDs in the print version of the kit will be available as a download$200 -
Version 1.0
The Mastercam X9 Instructor Kit for Mill & Lathe is the ultimate toolkit for instructors looking to enhance their 2D mill, 3D mill and lathe classes while minimizing prep time The Instructor Kit for Mill & Lathe offers an array of tools to make Mastercam easier than ever to understand. This package includes: Mastercam X9 Mill Essentials Instructor Guide Mastercam X9 Mill Essentials Training Tutorial Mastercam X9 Mill Advanced Instructor Guide Mastercam X9 Mill Advanced Training Tutorial Mastercam X9 Mill Lathe Instructor Guide Mastercam X9 Mill Lathe Training Tutorial Mastercam X9 Home Learning Edition / Demo Software- pending release from CNC Software Practice Exercise, Quizzes, Mid-Term and Final Exam Tests Completed parts (.MCX-9) for verification purposes Instructor PowerPoint® presentations Note: Files included on the instructor resource CDs in the print version of the kit will be available as a download$200 -
-
-
Mastercam X9 HLE (Home Learning Edition) Crashing
KartEnthusiast posted a topic in Educational Forum
Hello to whomever reads this, I am a student just beginning learn Mastercam. I am using Mastercam X9 HLE (Home Learning Edition) and it worked for a few weeks with no problem. Now it doesn't even open and directs me to the crash report message in the picture I uploaded. I have submitted the forms in the crash report twice and nothing happened. I have also tried uninstalling and re-installing it, but it still sends me to the crash report. Anyone have any advice on how to get it running again? My sincerest thanks, KartEnthusiast
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
