This is an electronic only purchase downloadable in PDF format.
Published by: In-House Solutions Inc.
This eBook is designed for the experienced Mastercam user and provides the reader with knowledge of 3D design and 3D toolpaths.
The eBook starts with an introduction to Mastercam planes and views. You will learn how to use predefined planes and how to create new planes using commands such as From Geometry, Dynamic and From entity normal. You will also learn how to set the constructions planes at different Z depths. You will learn how to create 3D Wireframe, Surfaces and 3D Solid geometry.
Surface toolpaths, Rough pocket and Finish contour, will be compared with 3D High Speeds toolpath, Area Roughing and Waterline. Scallop, Equal Scallop and Pencil High Speed toolpaths will also be introduced.
You will learn how to create surfaces using the following surface commands: Revolved, Draft, Flat boundary, Ruled/Lofted, Net, Sweep and Power surfaces.
3D High Speed OptiRough, Horizontal Area, Hybrid and Project toolpaths are also covered. You will learn how to modify surfaces using Offset surface, Trim surface, Fillet surface and Blend surface commands. You will also learn how to work with Stock model toolpaths that can be used in verify as stock, to define stock for rest machining or in stock model compares. When and how to use Surface Flowline, 3D High Speed Radial, Blend and Raster will also be explained.
Once you have registered for this book you can download it here: https://www.emastercam.com/files/file/1477-mastercam-2023-mill-3d-professional-courseware/