Search the Community
Showing results for tags 'HA5C'.
Found 3 results
-
Hey Guys, I want to stand my HA5C up on end and use is as a C-Axis to hold some tight TP on a bolt circle. Basically want to make 1 "X" move, then just use the rotary motion to position all the holes. What would be the best way to do this? In my drilling OP, I activated Rotary Axis Control and chose Rotary Axis Positioning>Rotate around "Z" axis. I got no change. Thanks!
-
Hey Guys, First time drilling with a rotary axis in my VMC. I included a sample file I'm working on. Do I use 5axis drill or normal drill toolpath with rotary positioning? I have a multi-axis seat. The current file I used 5axis drill. I tried using lines and surface for tool axis control. I tried hole axis vectors and points for cut pattern, but I'm not really getting anywhere and I keep getting the error below. rotary sample.mcx-8
-
Hey Guys, Is it possible to surface the sample attached with a BEM and use 3 or 4 axis. I've tried a few Multiaxis toolpaths "rotary", "curve", "morph between 2 curves" When looking at my sample, the dashed green line extends to the origin so it's basically a can. TIA I have an HA5C rotary for this. Rotary Help Sample.mcx-8
