Search the Community
Showing results for tags 'a-axis'.
Found 3 results
-
Example 1 mm of chamfer X50. Z1. G1 x52. Z-1. F. 1 A axis X50. G1 X52. A-135. F. 1 (WE NEED THIS TYPE OF POST) HELP ME FRIENDS THANK YOU❤
-
Hey, trying to sort out the final issues with my rotary A axis. I'm using an RT-160 model on a Doosan DNM 500 VMC with a Fanuc i-series controller. The issue I'm having is that the controller stops on the M10 when the axis locks. It reads the M11 perfectly fine and proceeds with the A-axis rotation but when it hits the M10 it locks the axis and does not continue with the program. Has anyone else run into the issue, or have any suggestions as to what the problem might be? Any help is appreciated -
Hey Guys, I want to stand my HA5C up on end and use is as a C-Axis to hold some tight TP on a bolt circle. Basically want to make 1 "X" move, then just use the rotary motion to position all the holes. What would be the best way to do this? In my drilling OP, I activated Rotary Axis Control and chose Rotary Axis Positioning>Rotate around "Z" axis. I got no change. Thanks!
