Search the Community
Showing results for tags 'home'.
Found 4 results
Tracy @ In-House Solutions posted a file in Mastercam Demo Software
DanielGingras posted a file in Mastercam Demo Software
JonathanMaes posted a topic in Industrial ForumI'm having an issue programming with X7, I'm doing some 5-axis work and I'm trying to set reference points so I don't swipe the part. My retract works as expected, it goes to a safe location for the tool to swing to position. However, my approach is totally ignored. It shows nothing in backplot or verify or the posted code. Basically the tool starts from my clearance plane, which means taking out the steel casting I'm cutting as the B axis swings around. Any ideas on how I can get a safe start position out of this? Also, home position does nothing.
Hi, How i can force in G-code output "Home position " after tool change. right now i have next output : N100 G00 N110 G20 N120 G99 N130 G50 S3500 N140 G54 T0202 ( T2 OD FINISH RIGHT - 35 DEG. INSERT - VNMG-431 ) N150 G96 S200 M03 ( ------RIGHT HERE -------) I would like to have "Home position" defind volume . N160 G00 X2.0185 Z0.1 N170 G01 Z0. F0.005 N180 Z-0.5412 N190 G02 X2.0216 Z-0.574 R0.3531 N200 G01 X2.284 Z-1.9804 N210 G03 X2.3335 Z-2.512 R5.7226 N220 G01 Z-8.8583 N230 X2.4749 Z-8.7876 N240 M09 N250 G00 X5. Z0.25 N260 T0200 M05 N270 M30 Thank you in advance