Search the Community
Showing results for tags 'issue'.
Found 3 results
Hi everyone, We just bought Renishaw Productivity Plus for Mastercam X7. I am trying to make it works on our new machine : machine: AWEA 3016 controller: FANUC 31i The dealer modified our post .pst to make it communicate with the Renishaw post ,renmf for FANUC 31i controller. On MasterCam, I am able to post the program. However, when I am trying to run it on the machine, the program tries to open subprogram that doesn't exist on the machine (see the attached file to see all the program that the program is trying to open. Here's the beginning of the program until the error pop on the screen: O0000 (PIECE TEST-6) (AWEA SP3016) (MACHINE GROUP-1) (MCX FILE - G:\RENISHAW PROBING\PIECE TEST.MCX-7) (PROGRAM - PIECE TEST-6.NC) (DATE - DEC-18-2013) (TIME - 11:16 AM) (T60 - RENISHAW OMP60 - H60 - D60 - D0.2362" - R0.1181") (T4 - SLOTTER 1.00 COURT R1/16 PASSE .125 - H4 - D4 - D1.0000" - R0.0620") (T48 - END MILL 3/8 .375 CARB. FINISH - H48 - D48 - D0.3750") #149=0 (RENPROGSTART) #148=0 (RENPROGSTARTEND) (_RENGCODE_START0001) N100 G00 G17 G20 G40 G49 G80 G90 (_RENGCODE_END) (PRODPLUS_BEGIN) POPEN DPRNT DPRNT[PROGRAM*START*PGS] DPRNT[**REPORT*VERSION*1F] DPRNT[**PROGRAM*NAME**O] #1=FIX[#3011/10000] #2=#3011-[#1*10000] #3=FIX[#2/100] #4=#2-[#3*100] DPRNT[**DATE*#4**#3*#1] #1=FIX[#3012/10000] #2=#3012-[#1*10000] #3=FIX[#2/100] #4=#2-[#3*100] DPRNT[**TIME*#1**#3**#4] PCLOS M5 G54 G90 at this line FILE NOT FOUND POP G65 P2109 A1. C1. I0. 1181 D2. E2. H60. M0. Q0. R0.T-999U60.V1.W0.91Z1. Right now I called the dealer where we bought the machine, they said that all the program are in the machine... I called the dealer who sold us Productivity plus and they don't know why it doesn't work... I also wrote to Renishaw and I am waiting for a response. I also check every single program in the machine.. Can anyone help me ? Thanks a lot Cedrick Baker Missing Sub Programs AWEA 3016.txt
Hi, Im new at the forum, Im having a problem with Mastercam 2017 in windows 10 the problem is that I've already installed twice mastercam 2017 and when I try to verify the machining (simulate) gives me this error " C-Hook not found... C:/ Program files/mcam2017/chooks/MachSim.DLL " Anybody with the same issue that can help? Thank you
First post! Hello Folks! Amateur programmer here only using mastercam for about 3 years now. A lot of the older guys like to have me do all the research on issues with their software. Let me get straight to the point. We have about 8/9 PCs around the shop running mcam, and 5 of which are full time including myself. Recently with the install with 2018 being released I installed it on all of our machines. Some programmers are not so quick to jump into the new release as others. Myself, I jumped right in. I encountered an issue with printing from and through phone calls back and forth, sessions with our re seller we were unable to come up with a solution or reason for the issue. Basically it would only print the top maybe 10% of the page and cut off the rest. Long story short I just resulted to printing to a PDF and then printing from there. Short work around, but work around none the less. I was the only one having the issue until a second machine started having the same issue. After some use and a few weeks went by one of our machines had encountered an issue where we would open MCAM 2018 and nothing would happen. No splash screen, nothing. Yet after some investigation opening the task manager mastercam would still show up in processes but nothing would be open. After working with our reseller and going back and forth with them attempting to fix the issue for days they were unable to figure out the issue or why this was happening. The reseller even got CNC Software involved and they couldnt figure it out. Our short term solution was to choose a system restore point previous to the issue. It has since happened three other times. Once more with the same machine and twice on another. Now this time the system restore point has not worked. These are just happening at random times upon closing/opening or on restart. Wanted to post here to maybe see if anyone else is having similar issue or may have suggests of us. Much appreciated! Sam