Search the Community
Showing results for tags 'post help'.
-
Good morning! I have a 2022 4-axis Haas post, but I just got a new computer that has MasterCam 2023. I can't seem to use the migration wizard to convert the 2022 post to 2023. I've done this successfully in the past but I think the issue may be that I don't have a 'Shared MasterCam 2022' folder in my PC's directory. I've tried copying and pasting a full 'Shared MasterCam 2022' folder and subfolders from another PC and I still can't convert my post. Unfortunately I don't have access to a 2023 copy of the post. Any suggestions? Thanks in advance
-
Hey Team, I am trying to output the Tool manufacturers code from the tool settings into the G code. I have it working when the tool code is numerical but when the tool code has letters in the code it stops outputting after the Tool manufacturers code after the first letter is hit. ex. 78987t8987 post will output 78987 and stop. pardon the bad coding I am hacking and learning as I go. Thanks in advance. fmt "TC=" 25 groupcom # out put the tool_op$ Manufactuers code if prmcode$ = 20002, groupcom = rpar(sparameter$, 50) (Pheader) sopen_prn, *groupcom, sclose_prn, e$
-
I used the post debugger to find line 1820 in my post, but I have no idea what's wrong with it. From past experience, I think the line noted in the error report is the only "critical" error. Is that correct? This is a modified MPFAN with mainly cosmetic changes. It was updated from X2 to X6 MU2. I've posted the error report and the section of my post at line 1820. 09 Aug 2012 11:51:13 AM - <0> - Report created. 09 Aug 2012 11:51:13 AM - <2> - Initialize posting log file 09 Aug 2012 11:51:13 AM - <2> - Using MP run version 15.00 and post components version 15.00 09 Aug 2012 11:51:13 AM - <2> - Initiate opening the post processor file(s). 09 Aug 2012 11:51:13 AM - <2> - C:\USERS\PUBLIC\DOCUMENTS\SHARED MCAMX6\MILL\POSTS\VM7.PST 09 Aug 2012 11:51:13 AM - <2> - The post processor file has been successfully opened. 09 Aug 2012 11:51:13 AM - <2> - Post version information (input): 09 Aug 2012 11:51:13 AM - <2> - UPDATEPOST Version 15. was used to modify this file. 09 Aug 2012 11:51:13 AM - <2> - The file was modified by this product on 26 Jul 12 08:51:57 09 Aug 2012 11:51:13 AM - <2> - The post was written to run with Mastercam Version 15. 09 Aug 2012 11:51:13 AM - <2> - The post product type is Mill. 09 Aug 2012 11:51:13 AM - <2> - Initialization of pre-defined post variables, strings, postblocks was successful. 09 Aug 2012 11:51:13 AM - <2> - Search for defined post variables, strings, postblocks was successful. 09 Aug 2012 11:51:13 AM - <2> - PST LINE (1820) - The formula/boolean failed (general message) <-------ONLY ERROR TO BE CONCERNED WITH? 09 Aug 2012 11:51:13 AM - <2> - CONTROL DEFINITION - Post variable 'ltol$' was re-initialized from 0.002 to 0.0005 09 Aug 2012 11:51:13 AM - <2> - CONTROL DEFINITION - Post variable 'atol$' was re-initialized from 0.01 to 0.5 09 Aug 2012 11:51:13 AM - <2> - CONTROL DEFINITION - Post variable 'dec_seq_right$' was re-initialized from 3. to 0. 09 Aug 2012 11:51:13 AM - <2> - CONTROL DEFINITION - Post variable 'spaces$' was re-initialized from 1. to 0. 09 Aug 2012 11:51:13 AM - <2> - CONTROL DEFINITION - Post variable 'arcoutput$' was re-initialized from 1. to 0. 09 Aug 2012 11:51:13 AM - <2> - CONTROL DEFINITION - Post variable 'arcoutputxz$' was re-initialized from 1. to 0. 09 Aug 2012 11:51:13 AM - <2> - CONTROL DEFINITION - Post variable 'arcoutputyz$' was re-initialized from 1. to 0. 09 Aug 2012 11:51:13 AM - <2> - CONTROL DEFINITION - Post variable 'larcoutput$' was re-initialized from 1. to 0. 09 Aug 2012 11:51:13 AM - <2> - CONTROL DEFINITION - Post variable 'larctypexz$' was re-initialized from 1. to 0. 09 Aug 2012 11:51:13 AM - <2> - CONTROL DEFINITION - Post variable 'larcoutputyz$' was re-initialized from 1. to 0. 09 Aug 2012 11:51:13 AM - <2> - CONTROL DEFINITION - Post variable 'breakarcs$' was re-initialized from 2. to 0. 09 Aug 2012 11:51:13 AM - <2> - CONTROL DEFINITION - Post variable 'breakarcsxz$' was re-initialized from 2. to 0. 09 Aug 2012 11:51:13 AM - <2> - CONTROL DEFINITION - Post variable 'breakarcsyz$' was re-initialized from 2. to 0. 09 Aug 2012 11:51:13 AM - <2> - CONTROL DEFINITION - Post variable 'lbreakarcs$' was re-initialized from 2. to 0. 09 Aug 2012 11:51:13 AM - <2> - CONTROL DEFINITION - Post variable 'lbreakarcsxz$' was re-initialized from 2. to 0. 09 Aug 2012 11:51:13 AM - <2> - CONTROL DEFINITION - Post variable 'lbreakarcsyz$' was re-initialized from 2. to 0. 09 Aug 2012 11:51:13 AM - <2> - CONTROL DEFINITION - Post variable 'helix_arc$' was re-initialized from 2. to 1. 09 Aug 2012 11:51:13 AM - <2> - CONTROL DEFINITION - Post variable 'lhelix_arc$' was re-initialized from 2. to 1. 09 Aug 2012 11:51:13 AM - <2> - CONTROL DEFINITION - Post variable 'do_full_arc$' was re-initialized from 0. to 1. 09 Aug 2012 11:51:13 AM - <2> - CONTROL DEFINITION - Post variable 'do_full_arcxz$' was re-initialized from 0. to 1. 09 Aug 2012 11:51:13 AM - <2> - CONTROL DEFINITION - Post variable 'do_full_arcyz$' was re-initialized from 0. to 1. 09 Aug 2012 11:51:13 AM - <2> - CONTROL DEFINITION - Post variable 'ldo_full_arc$' was re-initialized from 0. to 1. 09 Aug 2012 11:51:13 AM - <2> - CONTROL DEFINITION - Post variable 'ldo_full_arcxz$' was re-initialized from 0. to 1. 09 Aug 2012 11:51:13 AM - <2> - CONTROL DEFINITION - Post variable 'ldo_full_arcyz$' was re-initialized from 0. to 1. 09 Aug 2012 11:51:13 AM - <2> - CONTROL DEFINITION - Post variable 'arccheck$' was re-initialized from 1. to 111. 09 Aug 2012 11:51:13 AM - <2> - CONTROL DEFINITION - Post variable 'larccheck$' was re-initialized from 1. to 111. 09 Aug 2012 11:51:13 AM - <2> - CONTROL DEFINITION - Post variable 'rotfeed4$' was re-initialized from 2. to 1. 09 Aug 2012 11:51:13 AM - <2> - CONTROL DEFINITION - Post variable 'rotfeed5$' was re-initialized from 3. to 1. 09 Aug 2012 11:51:13 AM - <2> - CONTROL DEFINITION - Post variable 'lrotfeed4$' was re-initialized from 2. to 1. 09 Aug 2012 11:51:13 AM - <2> - CONTROL DEFINITION - Post variable 'lrotfeed5$' was re-initialized from 0. to 1. 09 Aug 2012 11:51:13 AM - <2> - CONTROL DEFINITION - Post variable 'sub_level$' was re-initialized from 1. to 0. 09 Aug 2012 11:51:13 AM - <2> - CONTROL DEFINITION - Post variable 'peckacel$' was re-initialized from 0. to 1. 09 Aug 2012 11:51:13 AM - <2> - CONTROL DEFINITION - Post variable 'usecanmisc2$' was re-initialized from 1. to 0. 09 Aug 2012 11:51:13 AM - <2> - CONTROL DEFINITION - Post variable 'lusecanmisc2$' was re-initialized from 1. to 0. 09 Aug 2012 11:51:13 AM - <2> - Successful completion of posting process! #CNC<<ORIGINAL>> #sav_rot_on_x = rot_on_x #Uncomment this line to output rotary axis value even when it's not used t$ ? #Buffers out tool number values <-------THIS IS LINE 1820 Does anyone know how to fix this? Thad
Join us!
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.