Search the Community
Showing results for tags 'rapid'.
Found 1 result
-
Can anyone tell me how to convert rapid moves to a set feed rate using mastercam18? i have 5000 lines of code and for whatever my reason my lathe wont accept it with rapid moves. when i convert the first couple rapid moves to feed it runs fine. the code is good, machine doesnt alarm out, it just sits there when it gets to the first rapid move. i included the code. the last line is when it just sits there doing nothing. but will orientate initially just fine O0000(TEST) (DATE-01-08-22 10:20 AM) G20 (TOOL-9OFFSET-9) ( 1/16 BALL ENDMILL) (DOOSAN C-AXIS LATHE) G54 N9 T0909 G98 M23 M90 G0 C103.638 (has no problem with initial orientation) M88 G0 X5.2 Z-.4242 M8 G97 S2500 M51 X4.9 G1 X4.6933 F1. X4.6923 Z-.3935 C102.87 F139.71 C108.321 F195.37 X4.6913 Z-.3628 C108.325 F1. X4.9 F50. G0 X5.2 Z-.3935 C108.321 (this is where it sits there, if i change it to a G01 with a feed it does fine)
