Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Search the Community

Showing results for tags 'shaping'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Forums

  • Mastercam Forums
    • Industrial Forum
    • Post Processor Development Forum
    • Educational Forum
    • Woodworking Forum
    • Machining, Tools, Cutting & Probing
    • 3D Printing

Categories

  • Mastercam Demo Software
  • Files Referenced in Books and Videos
    • Instructor Files
    • Mastercam X7
    • Mastercam X6
    • Mastercam X5
    • Mastercam X4
    • Mastercam X3
    • Mastercam X2
    • STEM
  • Free Book Samples
    • Mastercam 2020
    • Mastercam 2019
    • Mastercam 2018
    • Mastercam 2017
    • Mastercam X9
    • Mastercam X8
    • Mastercam X7
    • Mastercam X6
    • Mastercam X5
    • Mastercam X4
    • Mastercam X3
    • STEM Curriculum
  • Mastercam eBooks (PDF)
    • Mastercam 2023
    • Mastercam 2022
    • Mastercam 2021
    • Mastercam 2020
    • Mastercam 2019
    • Mastercam 2018
    • Mastercam 2017
    • Mastercam X9
    • Mastercam X8
    • Mastercam X7
    • Mastercam X6
    • Mastercam X5
    • Mastercam X4
  • Mastercam Documentation
    • Brochures
    • Press Releases
    • Tips & Guides
  • Tools
  • Post Processors
    • Post Processor 'How To' Info
    • Mpmaster (all versions)
    • Mplmaster (all versions)
    • Application Specific Posts
    • Educational Post Processors
    • Post Processor Request Forms
    • Post Processor Feature Checklist Forms

Product Groups

  • Sitewide Subscription
  • Books
    • Older Versions (No Demo Software)
  • eBooks (PDF)
    • Mastercam 2023
    • Older Versions (No Demo Software)
  • Multimedia
    • Older Versions (No Demo Software)
  • Clearance
  • eCourses
  • eCourses

Categories

  • General Mastercam
    • Hasp / Sim License Articles
    • Nethasp
  • Lathe
  • Toolpaths
    • FBM Drill
    • FBM Mill
    • Dynamic Milling
    • Contour
    • Drill
    • Pocket
    • Face
    • 2D Highspeed
    • Engraving
    • Surface Rough
    • Surface Finish
    • Surface High Speed
    • Curve 5 axis
    • Drill 5 Axis
    • Swarf 5 Axis
    • Multisurface 5 Axis
    • Flow 5 Axis
    • Rotary 4 Axis
    • Port 5 axis
    • Advanced Multiaxis
    • Circle Paths
    • Circle 5 Axis
  • Wire EDM
  • Art
  • Post-Processing
  • Editors & DNC
  • Add-ons + Chooks & Nethooks
  • Windows, PC & Hardware Troubleshooting
    • Windows Issues
    • Videocards
    • Network & Filesharing
  • Multiaxis
  • eBooks

Blogs

  • Mastercam Training Solutions
  • eMastercam Community
  • Reseller Blog
  • Future of CNC Manufacturing Education
  • Mastercam Xtras
  • Latest News

Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


Interests


Location


Mastercam SIM Number


AIM


MSN

Found 2 results

  1. I recently designed a macro program to do face grooves in parts that require a circular finish. I have not yet been able to test it and will keep updating the code here. However, if anybody else ever has a need for it. Here it is. If you do try this code, do so with extreme caution. This program could be incredibly dangerous if operated incorrectly, (think broken part, spindle, tool, etc.) If you do use it, let me know how it goes here. Cheers, Caleb ; PROGRAM DESIGNED TO CUT CIRCULAR FINISH GROOVES THAT ARE NOT ABOUT A ROTATION AXIS ON A PART ; WORK OFFSET SHOULD BE SET TO CENTER AND TOP OF FEATURE DESIRED ; THIS PROGRAM IS VERY DANGEROUS, DO NOT STOP MACHINE DURING CYCLE ; SINGLE BLOCK, FEED HOLD, CYCLE HOLD, FEED OVERRIDE, AND SPINDLE OVERRIDE OVER CAN CAUSE CATASTROPHIC FAILURE ; PROGRAM DESIGNED IN INCH MODE, MAY BE UNSTABLE IN MM ; PROGRAM IS DESIGNED TO CUT FEATURE TO SIZE WITH NO STEPOVER ; ACTUAL SPINDLE POSITION CLOCK POSITION MAY NEED ADJUSTMENT, SEE LINE 60 DEF REAL _F_DIA; FEATURE DIAMETER DEF REAL _Z_DEPTH; DEPTH OF FEATURE DEF REAL _Z_FEED; INFEED OF TOOL, AS LATHE DEF REAL _T_TOOL_OFFSET; B DISTANCE OF TOOL IN SPINDLE, OFFSET OF TOOL FROM CENTER OF SPINDLE DEF REAL _PI; PI CARRIED TO 5TH DECIMAL DEF REAL _H_TRAVEL; ACTUAL DIAMETER TRAVEL, DIAMETER OF FEATURE - RADII OF TOOL*2 DEF REAL _F_RATE; FEEDRATE CALCULATION DEF REAL _LOOP_CUT; CALCULATION FOR LOOP CUTTING DEF REAL _FINAL_Z_CUT; FINAL CUT IN Z DEPTH DEF INT _TOOL; TOOL NUMBER, OR NAME, BEING USED DEF INT _T_HEIGHT; D VALUE BEING USED DEF INT _RPM; RPM OF MILLING SPINDLE ; THESE VARIABLES REQUIRE INPUT BEFORE RUNNING; INPUT OF 0 WILL RESULT IN ALARM ; ***INPUT DATA DESIRED HERE*** _F_DIA=3 _RPM=1 _Z_DEPTH=.050 _Z_FEED=.003 _TOOL=16 _T_HEIGHT=1 STOPRE T=_TOOL D=_T_HEIGHT; TOOL CALL, AND HEIGHT CALL M6 STOPRE _LOOP_CUT=(TRUNC(_Z_DEPTH/_Z_FEED)) _T_TOOL_OFFSET=($P_TOOLL[2]) _PI=(3.14159) STOPRE _H_TRAVEL=(_F_DIA-(_T_TOOL_OFFSET*2)) STOPRE _F_RATE=(_H_TRAVEL*_RPM*_PI) _FINAL_Z_CUT=((_LOOP_CUT*_Z_FEED)-_Z_DEPTH) STOPRE IF _F_RATE>500 GOTOF "MESSAGES_ALARMS_2" IF _F_DIA<=.500 GOTOF "MESSAGES_ALARMS_1" IF _RPM<=0 GOTOF "MESSAGES_ALARMS_1" IF _RPM>=100 GOTOF "MESSAGES_ALARMS_2" IF _Z_DEPTH<=0. GOTOF "MESSAGES_ALARMS_1" IF _Z_FEED<=0. GOTOF "MESSAGES_ALARMS_1" IF _Z_FEED>=.01 GOTOF "MESSAGES_ALARMS_2" STOPRE SUPA G00 G90 Z0.; G17; G54; SPOS=AC(180.); ADJUST POSITION AS NECESSARY, INPUT IS DEGREES G97; X=(_H_TRAVEL*(1/2)) Y0. Z1.; Z.1; G94 G01 Z.005 F25.; G02 X=(_H_TRAVEL*(1/2)) Y0. Z0. I=-(_H_TRAVEL*(1/2)) J0. F=(_F_RATE) S=(_RPM) M3; SPINDLE ACTIVE, DO NOT FEED HOLD!!! CUTTING_ACTION: X=(_H_TRAVEL*(1/2)) Y0. Z=IC(-(_Z_FEED)) I=-(_H_TRAVEL*(1/2)) J0. REPEATB CUTTING_ACTION P=(_LOOP_CUT-1) X=_H_TRAVEL*(1/2) Y0. Z=IC(_FINAL_Z_CUT) I=-_H_TRAVEL*(1/2) J0.; FINAL Z CUT FINAL_DEPTH: X=(_H_TRAVEL*(1/2)) Y0. Z=-(_Z_DEPTH) I=-(_H_TRAVEL*(1/2)) J0.;CLEANUP PASS, REMOVES Z RAMP REPEATB FINAL_DEPTH P=2; 2 SPRING PASSES AT DEPTH X=(_H_TRAVEL*(1/2)) Y0. Z.005 I=-(_H_TRAVEL*(1/2)) J0.; BACK TO CLEARANCE HEIGHT G01 Z.1 F25.; SUPA G00 Z0. M05; M30; MESSAGES_ALARMS_1: STOPRE LOOP MSG ("PARAMETER MISSET, LOW") M00 ENDLOOP MESSAGES_ALARMS_2: STOPRE LOOP MSG ("PARAMETER MISSET, HIGH") M00 ENDLOOP
  2. Hey, I did a search and couldn't find anything on this topic. I am looking to use the shaping option Mazak offers on my Integrex i300. The feature on the part is just a simple o-ring groove that is 1.37" major diameter ( correct terminology for grooves? ). Not very big at all. My question is, has anyone ever written a program for Shaping before and willing to share some sample code? I've been studying the manual trying to make sense of it buuuuttt...... The groove will be machined at B90.° so the C axis will not be used except to position the groove top surface. It's just a flat O-Ring Groove. I'm working on getting the Shaping Option as we speak. The Orbiturn option I do not believe is necessary. Thoughts/concerns? Thanks for the help!

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...