I added my post and machine def to my simulation set up folder. When I check use post in the simulation settings I get an error that states the post is not creating the necessary .cd and .sim files. Is there any documentation On how to add this to the post?
TIA
Input file with expansion .CL The file with the extension .red is used to offset workpiece geometry and position When you run a machine simulation, you will see - use external post mcamTools folder used to store the machine tools for simulation with the extension .sim
this example It supports only wcs - Top
Supports in metric mode Does not support tool compensation - control
Transformathion - source operations - disadle posting in selected source operations