Greetings all,
I have developed a setup sheet that is really more of an Operation check list.
Developed for minimal paper waste.
It works with all three of the main program types without changing report templates: Mill, Lathe, and Mill/Turn.
The operations are color coded: Blue is turning, Yellow is Milling, and red is Manual Entry.
If the tools are named in Mastercam the way that I recommend, all of the information will be there for the operator: Insert codes, etc.
Greetings all,
I have developed a setup sheet that is really more of an Operation check list.
Developed for minimal paper waste.
It works with all three of the main program types without changing report templates: Mill, Lathe, and Mill/Turn.
The operations are color coded: Blue is turning, Yellow is Milling, and red is Manual Entry.
If the tools are named in Mastercam the way that I recommend, all of the information will be there for the operator: Insert codes, etc.